GT King Pro-Ubuntu 21.10 Impish Indri Firmware with Panfrost-5.14.15 Kernel

pspablo · 发表于 2022-04-01 17:57:50

I've already changed it but it doesn't start

darkstar · 发表于 2022-04-03 16:49:52

Edited by darkstar at 2022-04-03 16:53

pspablo replied at 2022-03-31 22:06
Hello. After installing Ubuntu from both SD card and USB stick, Beelink GT_King does not start up. ...

What do you mean by installing from SD and usb, I hope you did not install to emmc.

This firmware is supposed to run only from USB (OTG Port), due to u-boot.ext sdcard does not work.
Just flash the image to a usb drive and boot it from USB-OTG port.

What is your device version?

pspablo · 发表于 2022-04-04 17:52:44

GT-King SN SB9XH0J....64gb

pspablo · 发表于 2022-04-04 18:03:01

a device descriptor error occurs

darkstar · 发表于 2022-04-04 22:10:09

pspablo replied at 2022-04-04 18:03
a device descriptor error occurs

Could you please share a screenshot or photo of the error.

darkstar · 发表于 2022-04-07 17:06:57

Edited by darkstar at 2022-04-07 17:11

pspablo replied at 2022-04-07 03:29
these are the errors

I cannot read the error message from the photographs, but second one seems like kernel panic.
If you need help you must be clear.

pspablo · 发表于 2022-04-09 01:09:08

darkstar replied at 2022-04-07 17:06
I cannot read the error message from the photographs, but second one seems like kernel panic.
If yo ...

Proszę

darkstar · 发表于 2022-04-10 17:41:58

pspablo replied at 2022-04-09 01:09
Proszę

It seems your usb device does not working properly (first photo).
Please try with a different usb drive.

The second message seems like wrong dtb or I guess you are trying to boot from SD card. Due to second stage boot loader this build does not boot from sdcard, sorry.

pspablo · 发表于 2022-04-11 03:35:31

darkstar replied at 2022-04-10 17:41
It seems your usb device does not working properly (first photo).
Please try with a different usb ...

It seems that one of the reasons for not poking the device is a USB hub. Something's wrong with him, but that's not all. After changing the write in uEnv.ini to gt-king, do I have to change dtb.img to amlogic directory?

darkstar · 发表于 2022-04-16 20:54:07

pspablo replied at 2022-04-11 03:35
It seems that one of the reasons for not poking the device is a USB hub. Something's wrong with h ...

you dont need to change anything, just follow instructşons on first post.