Beelink GT1 bricked, please help

Jhonnie

Yes I have 100% sure that is a bad bootloader.

Can anyone send me message with the picture for GT1 Ultimate with the PINs to short?

I don't find it on the posts above.

Chomee

Hi Jhonnie, I can show you which pins to short, but I cannot upload it here, dunno why. Contact me on skype (milan7483)

Zebberty

Chomee replied at 2017-03-20 16:25
Hi Jhonnie, I can show you which pins to short, but I cannot upload it here, dunno why. Contact me o ...

Hi! Please help me with my Beelink GT1 Ultimate. I think i bricked it. Please send me some instructions on shorting pins. Image and what should I do. My email zebberty@gmail.com

Chomee

It stopped working again, but pc recognizes box. Now when I want to flash firmware with Usb Burning tool, it shows me after 2% of burning this error:
[0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error
I tried 4 different firmwares, and the same happens every time. Can anyone suggest something? I can copy whole error if it can help determine the problem.

Frank

That was the exact same  error it gave me when I tried to flash the wrong firmware. Like yours, mine also stopped at 2% and returned me with that error...
Make sure that your firmware is correct! Go to freaktab dot com website and download the correct firmware. Also try to change different versions of the burning tool...
The procedure that worked for me was:
1) Connect the phone
2) Open the burning tool
3) connect the power cord

It didn't work the first 3 times. But in the end it worked. What really "opened" the phone for me was installing the android box tv rom for  AP6255 WiFi chipset. It is called Alfawise S92 TVStock Nexus ROM (Android TV) and it is on Freaktab dot com.
You also have to install the patch for the  AP6255 in order to make wifi work along with that ROM. If you manage to install this rom there is nothing working with your box.

Frank

I meant "Wrong" not working...sorry for the mistyped word...

Chomee

Thank you Frank for quick answer! Actually firmware that I am trying to flash is GT1_109M0_AP6255, and was the one which I successfully burnt when I had previous problem. After I burnt it box was working great about a week, and then yesterday just stopped responding. I tried Alfawise S92 Nano Nexus ROM, it also stopped at 2%, now I am downloading Stock variant and we'll see if I'll be more lucky with that one.

miticofuro

unbelievable
the serial says on the box begins with A912...
but on cpuz hardware is this

Chomee

Alfawise S92 TVStock Nexus ROM also stopped at 2%. Any other ideas?

Chomee

I tried various roms, even those which arenćt for gt1. I did it on purpose just to see how installation would go, if I will move from 2% and same error. I read somewhere that when you get 0x10105002 Romcode/Initialize DDR/Read initialize status/USB Control setup.error you just need to find right firmware. I tried 104, 106, 109 and 110 original firmwares as well as Superceleron and Nexus Nano and Stock roms, same error occured. WIth 311 GT1 Ultimate rom I get stuck at 4% with [0x10202003]Romcode/Lead UBOOT/Download UBOOT/Data tranfer error. @Magendanz you made Nexus rom, do you maybe know what exactly in the rom is making installation to stop at 2% and is it possible to rewrite or combine with Ultimate rom so installation can proceed?