GT King with S/N 95X2

m.i.c.k.e.y · 发表于 2019-07-05 23:55:12

Edited by m.i.c.k.e.y at 2019-07-05 23:59

Only Just A Speculation:
They had parts delays/shortcums. Like the s/n S922 and B922 configs. I bet parts of 95X2 comes from GT Mini (S905x2) stock/inventory. It is not that I am angry, at least parts (on my unit) comes from tested ones. Manufacturers tend to do this (to meet demands/save costs etc.) as long it is in specs. Of which in my opinion (w/ regards to my unit) it is.

intrepixx · 发表于 2019-07-10 14:51:28

My GT-King also starts with the serial number 95X but since it doesn't start with a B, then I am going to assume the firmware needed is the 922X since both have 9 and X with no B anywhere in the serial number. Logic leans towards the 922X firmware which I am going to download and install. I will keep you posted as to the results.
P.S. I would advise a reset to factory settings BEFORE the firmware upgrade.

m.i.c.k.e.y · 发表于 2019-07-10 16:36:39

I do suggest you do a "Wireless Update" (OTA) instead under the System Menu.

Got the latest firmware from that route. No hassles.

frose6565 · 发表于 2019-07-10 23:59:48

intrepixx replied at 2019-07-10 14:51
My GT-King also starts with the serial number 95X but since it doesn't start with a B, then I am go ...

beelink admin..can you confirm please! we've been waiting for a straight answer but you are not helping!

mft4 · 发表于 2019-07-11 05:53:20

My S/N also starts with 95X2.

intrepixx · 发表于 2019-07-11 06:54:54

I have 2- Gt King units, one has the 922x serial # printed on a tag glued to the bottom and the other has 95x serial # on a similar tag glued in the same spot on its underside bottom. Question : Do both boxes use the 922x firmware upgrade ?

Loonix · 发表于 2019-07-11 07:23:21

intrepixx replied at 2019-07-11 06:54
I have 2- Gt King units, one has the 922x serial # printed on a tag glued to the bottom and the othe ...

yes, both use the same firmware.
only B922 uses a different one.

beelink · 发表于 2019-07-11 16:35:44

frose6565 replied at 2019-07-10 23:59
beelink admin..can you confirm please! we've been waiting for a straight answer but you are not he ...

H
Sorry, I asked the person in charge of the factory. He said that because a worker did not pay attention to the S/N code at the bottom of the post, some GT-King was attached to the S/N code of the GT1 mini. We are sorry, but this does not affect the use, still use the S992X SOC, you can also download the AIDA64 APK in the attachment, use AIDA64 to detect the hardware information.

ADIA64

AIDA64.Premium.v1.48.CN.apk (5.49 MB, 下载次数: 796)

m.i.c.k.e.y · 发表于 2019-07-11 19:59:01

Thanks for the clarification!

So case is close...

pingal · 发表于 2020-07-05 19:06:51

hello.
my seria number starts by SA9XH0GG
Anyone knows what firmware do i have?
thanks