no work GT1 ULTIMATE ! help!

daniel0178 · Post time 2019-01-21 06:24:54

Well friend I have tried a thousand times using SD card with the corresponding firmware image and always the result is the same ....the bloody grey android !!

I only have to try using the USB cable, with the USB_Burning_Tool, if it does not work that way I do not know what else to do?

daniel0178 · Post time 2019-01-21 06:27:11

All this stuff that comes out when trying to use any recovery mode option, is it normal?

daniel0178 · Post time 2019-01-21 09:22:03

I've been looking for information and I bumped into several sides with the novelty that beelink boxes, GT1 model B706DB have fake ram!

I do not know if this is so, but just my box is that model and I repeat, there is no firmware with which I can recover it!

Do you have a solution for this?

Phant0m`` · Post time 2019-01-21 09:32:19

daniel0178 replied at 2019-01-20 18:24
Well friend I have tried a thousand times using SD card with the corresponding firmware image and al ...

You are confusing what I'm telling you todo...

If you pay careful attention to my previous post..., you have your GT1 box up and running in no time.

daniel0178 · Post time 2019-01-21 09:47:32

Edited by daniel0178 at 2019-01-21 10:14

friend, let's see ...

I used the program BURN_CARD_MARKER and I recorded the image of FIRMWARE GT1_709DO_20180702 in the SD card,

you have created the 3 files as shown in the video, put the SD card in the box and only appears the android GRIS!

What's wrong?

Phant0m`` · Post time 2019-01-21 10:21:58

daniel0178 replied at 2019-01-20 21:47
friend, let's see ...

I used the program BURN_CARD_MARKER and I recorded the image of FIRMWARE GT1_ ...

If it doesn't go past that screen... regardless waiting for 10 minutes, unhook it and now test to see if the PC Amlogic USB Burning Tool now recognizes / detecting connected GT1 box. :P

daniel0178 · Post time 2019-01-21 10:29:10

That's what I'm saying! It doesn't go from there!

now I'm going to get a USB cable to USB, and test the method with PC

with SD card always the same error, it's impossible!

Phant0m`` · Post time 2019-01-21 10:57:17

Edited by Phant0m`` at 2019-01-21 00:41

daniel0178 replied at 2019-01-20 22:29
That's what I'm saying! It doesn't go from there!

now I'm going to get a USB cable to USB, and tes ...

The three files, two are.. aml_sdc_burn.ini and aml_sdc_burn.UBOOT besides the *.img file on the Micro-SD Card?

daniel0178 · Post time 2019-01-21 11:10:59

the device was working well with the updates via OTA published to date ...

The last time it worked came out, system error and froze with the sign that said this ...

I removed the power cable to restart, as I had done many times, but this time never passed the beelink logo ...

Then what I explain, I could never put any firmware using SD card ....all failed!

Phant0m`` · Post time 2019-01-21 12:36:14

daniel0178 replied at 2019-01-20 23:10
the device was working well with the updates via OTA published to date ...

The last time it worked ...

I'm caught up now! Alright, so you was using the latest one, already installed and it just failed during normal operation.

When you made this Micro-SD card using Amlogic Burn Card Maker utility.. When you inserted it into the GT1 box, are you holding carefully the reset button underneath of the unit and while holding, plugging the power adapter in ... and continue holding the RESET button until you see the Android logo?