GT1 Ultimate LPNGBNF00861 "Broken" ?

Phant0m``

Nano33320 replied at 2019-01-15 02:11
I installed and used "USB Burning Tool" in administrator mode.
I have tried, in administrator mode ...

Hi Nano33320.

Amlogic USB Burning Tool is fine, just make sure you have the latest installed.

The issue comes from when you was trying to upgrade initially and most likely trying with incompatible firmware. The box original bootloader was replaced with the wrong one, then you faced with ' Black Screen of Death ', or no TV signal and box not recognizable by Amlogic USB Burning Tool when connected.

It's definitely revivable, but it may take some work, and misses.

Just download the SD Card firmware package of the version that your box initially had before attempting the upgrade. Using the SD Card method, and the Factory RESET button that's underneath the unit. You should be-able to cause it to replace the BAD bootloader with the correct one. TV still be shown without a signal, but give it about 2 minutes. If the correct version of the bootloader is placed back on, and it was done right, when hooking it back up to the PC with Amlogic USB Burning Tool running, it should detect the box and allow it to flash it with latest COMPATIBLE firmware! :)

Nano33320

Nano33320 replied at 2019-01-15 14:11
I installed and used "USB Burning Tool" in administrator mode.
I have tried, in administrator mode ...

En fait, la GT1 Ultimate manque de fiabilité.
Les outils de mise à jour fonctionnent parfaitement avec une MXQ-Pro 4K (S905) du même fondeur Amlogic.
Ma TV Box a fonctionnée 2 heures maximum sans WiFi puis a rendu l'âme...

Cher de l'heure de fonctionnement alors que la configuration n'était pas finalisée.

Je crois que pour la prochaine Box j'irais voir ailleurs, avec des chance d'une fiabilité meilleure...

Bon courage à toutes et tous en espérant pour vous que vos galères seront plus légères (beaucoup d'heures passées pour rien !)

Salutations
Nano
__________________________________________________________________________________________________
In fact, the GT1 Ultimate lacks reliability.
The update tools work perfectly with a MXQ-Pro 4K (S905) from the same Amlogic foundry.
My TV Box worked a maximum of 2 hours without WiFi and then gave up the ghost ...

Expensive hours of operation when the configuration was not finalized.

I think for the next box I would go elsewhere, with a chance of better reliability ...

Good luck to all and hope for you that your galleys will be lighter (many hours spent for nothing!)

Greetings
Nano