Help required for Beelink GT1 Ultimate

Phant0m``

How to unbrick / revive any Amlogic devices.

Kashif

I ve tried as per your instructions and nothing happend. sdcard is preapred and I tried to press reset hole for 5 to 10 seconds and again more but there is no activity after a long time?????????????????

Kashif

there is only white light in my device no blink no ON/OFF
no display.................nothing

Phant0m``

It'll only work if you using the previous firmware that was installed before the upgrade attempt that broke your box. If you don't remember, you'll have to start from the previous to the last firmware release and cycle backwards until you finally unbrick it.

Kashif

I do remember that it was andriod 6...... and even dont know about the previous firmwares. As I had upgraded Box from Setting and now these are the problems.

For Andriod boxes, I have never faced these type of problems and it happened first time with me. I ll really appreciate if you will guide me step by step and send me the link of previous firmwares.

As per my experience there is something wrong with the reset small hole. i have tried alot to hold it all the ways but nothing happend in Burning Tools and Card maker as well.

Phant0m``

Beelink GT1 Ultimate S912/G912 3GB+32GB QCA9377(WiFi+BT) 1000Mbps Ethernet
GT1_313M0 (QCA9377) | May 21st, 2017
   Based On: GT1_312M0_20170504
   Serial Number Compatibility (S/N): S912..., G912...
   OTA (Over-The-Air) Released: Yes
   SD Card Upgrading: Yes
   EPROM Firmware: Yes
   Release Notes: Fix for 'Unfortunately, Google Play Store has stopped.'
   Official Link: http://www.bee-link.com/Beelink-3207-1-1.html

Beelink GT1 Standard / Ultimate Editions S912/G912 3GB+8GB/16GB/32GB QCA9377(WiFi+BT) 1000Mbps Ethernet
GT1_312M0_20170504 (QCA9377) | May 9th, 2017
   Based On: GT1_312M0 (Earlier release)
   Serial Number Compatibility (S/N): S912..., G912...
   OTA (Over-The-Air) Released: Yes
   SD Card Upgrading: Yes
   EPROM Firmware: Yes
   Release Notes: Fix for 'WiFi feature is or gets disabled, and cannot re-activate WiFi.'
   Official Link: http://www.bee-link.com/Beelink-2978-1-2.html

Beelink GT1 Ultimate S912/G912 3GB+32GB QCA9377(WiFi+BT) 1000Mbps Ethernet
GT1_311M0 (QCA9377) | April 17th, 2017
   Based On: N/A
   Serial Number Compatibility (S/N): S912..., G912...
   OTA (Over-The-Air) Released: Yes
   SD Card Upgrading: Yes
   EPROM Firmware: Yes
   Release Notes: N/A
   Official Link: http://www.bee-link.com/Beelink-2358-1-2.html

Phant0m``

Following the instructions that I've provided a link for, cycling through from newest Marshmallow release to the oldest.

Phant0m``

The RESET function will work, once the bootloader is replaced back with the original before the botched firmware.

sidi

What is the latest ROM for android 6 for beelink ultimate ?
IS someone Can send the link to download it ?

Phant0m``

Latest is GT1_313M0. You'd need to give me your box first four digits of the Serial Number, can be found underneath of the box.