|
You typically don't need to work with also the Beelink power adapter when flashing these boxes. In-fact, with the countless Beelink GT1 Ultimate boxes I've worked with... Never used the power adapter.
If you using low-end / Old PC, use the USB v2 port and not USB v1.x. Usually USB v2 ports are in back of the old desktop-PCs.
Make sure that you've removed the mini wireless keyboard receiver AND other USB devices from the Beelink boxes before you attempt to flash the boxes.
When you install the USB Burning Tool, make sure to accept it's driver installation. Also make sure you press carefully and holding down the RESET button long enough to hear the computer make a noise to indicate new device detection.
Also to make it crystal clear, Windows 10, 32bit or 64bit both supported by newest and older USB Burning Tool releases. |
|