Beelink GT1 bricked, please help

minonano

Miles
I have managed to get mine working again, pm me for info.

minonano

MilesTeg

(I've also tried to hit the pin at the bottom of the GT1 during the boot but also nothing happens). Please explain?

Also thanks to Phant0m and Chomee  for their help.

Phant0m``

MilesTeg replied at 2017-05-09 15:21
Hi,

I'm having the same problem like minonano. I have a bricked GT1 S912 and nothing I've done save ...

You have to do more than simply hit the reset button. You have to unplug the adapter from the box, push the reset button in, and then while holding the reset button in / down, you have to plug the adapter back in and wait until you see the Beelink logo on your TV before releasing the reset button.

Doing it through the PC via Amlogic USB Burning Tool, you have to follow my already detailed steps. It is important to use Beelink shared version 2.0.5.15 Build 8, because It includes the License directory with the mac file. If you use other packages, you miss this information, your box won't be detected. You can install this old version, then update, and that'll work. I already tested the latest version of Amlogic USB Burning Tool which is currently v2.0.8 and it worked as expected.

MilesTeg

@minonano, I've sent you a pm, thank you.

@Phant0m``, I did it exactly as you have described but nothing shows on the TV.

Also my PC can not detect the device even though I've installed the 2.0.5.15 Build 8 version. Do I need some other drivers to make the PC detect the device?

Thank you all for the support guys...

khalid

MilesTeg replied at 2017-05-10 14:22
@minonano, I've sent you a pm, thank you.

@Phant0m``, I did it exactly as you have described but no ...

need to replace male to male usb

MilesTeg

@khalid, I'm using a high quality(thick cable for sufficient power) male to male USB cable.

khalid

MilesTeg replied at 2017-05-10 14:39
@khalid, I'm using a high quality(thick cable for sufficient power) male to male USB cable.

some user got same problem like you... after replace usb it work...

MilesTeg

@khalid, thanks, I'll try with another cable...

MilesTeg

I've tried the cable on another device and also another cable on this one. Cable is fine, problem is with GT1 unfortunately.

Phant0m``

MilesTeg replied at 2017-05-10 02:22
@minonano, I've sent you a pm, thank you.

@Phant0m``, I did it exactly as you have described but no ...

Paste the contents of the mac_wifi.ini file found under Amlogic USB Burning Tool installed location in the License directory.