Beelink GT1 106_MO Firmware Discussion Thread

onurhonor · Post time 2016-10-27 04:12:24

sylad replied at 2016-10-27 01:27
Have you checked your setting on your TV picture with remote.
Mine has Noise Reduction ,the higher ...

I think if it was about tv settings (i have already checked all settings on tv) it should have effected also hw+ and sw decoded pictures. They are great, the only problem is hw decoder.

ceth · Post time 2016-10-27 05:54:13

i have updated my device to 106_MO, but the green flickering still exist!!!
ithat can not be and it is a shame, please fix that asap!

Will · Post time 2016-10-27 08:14:15

usualemi replied at 2016-10-26 22:17
I've tested del box for a long time, and i found that GT1 now closes normally and Kody shut down reg ...

I have the same problem, green/pink screen. Sometimes every 5 minutes... I saw on another forum and tv box than the only solution is FORCE RGB...

khalid · Post time 2016-10-27 08:48:16

Will replied at 2016-10-27 08:14
I have the same problem, green/pink screen. Sometimes every 5 minutes... I saw on another forum an ...

can try change 1080p 24hz

usualemi · Post time 2016-10-27 16:37:19

Will replied at 2016-10-27 08:14
I have the same problem, green/pink screen. Sometimes every 5 minutes... I saw on another forum an ...

If you look well in the other forum you will see that the solution "FORCE RGB" it's not able to solve the problem :'(

usualemi · Post time 2016-10-27 16:45:22

khalid replied at 2016-10-27 08:48
can try change 1080p 24hz

Nothing, that can't be a solution.
If you read on this forum you'll see that beelink had tried to make a specific firmware for people like me, that have the green/pink screen problem, but that firmware doesn't solve anything as the 106 after.
I don't know how, but only beelink, with a right firmware, can solve the green/pink screen problem... :L

Will · Post time 2016-10-27 17:24:38

khalid replied at 2016-10-27 08:48
can try change 1080p 24hz

I try but it doesn't work...

diaton101 · Post time 2016-10-27 23:13:58

Green/Pink is still here. For some of us which have this problem this renders the TV Box un-usable. It is impossible to see a movie or do sth.

Beelink this is vital. Please come up with a definite solution !!

usualemi · Post time 2016-10-28 00:51:03

diaton101 replied at 2016-10-27 23:13
Green/Pink is still here. For some of us which have this problem this renders the TV Box un-usable. ...

I agree with you!

trookam · Post time 2016-10-28 01:23:00

HI guys, i've just updated the tv box from 104 firmware to 106 and the tv box don't stop to blink. It's imposible to use it.

Any ideas???