SER5 5500U just received but it does not work

wallace_law

Just received new mini pc,  connected to power source, HDMI connected to monitor, no signal on the monitor.Only can hear the fan runs just 3-4 seconds, then stopped. Any idea ?

fxnoob

Try to use HDMI provided in box, not your old one. And change HDMI ports.

wallace_law

The provided HDMI cable is used and both HDMI ports were tried, no improvement.

fxnoob

It means is a DOA unit, start procedure for replacement.

Charlie

wallace_law replied at 2023-03-15 01:02
The provided HDMI cable is used and both HDMI ports were tried, no improvement.

You can try to hold in the CLR CMOS pin and see if it boots up. Other than that it sounds DOA and I would suggest another brand entirely, as these units are a reliability gamble.

tokenquest

Sounds like loose or bad RAM. Remove the Ram and only install one of the sticks.

Support-03

Hello,
Have you checked if it's the problem of the RAM?
You can also contact our email.

wallace_law

THANKS FOR ALL, that's the RAM problem. At first, use only one stick, 8Gb, it works properly. Then, add the other stick, total 16Gb, it still works. And the BIOS shows 16Gb RAM.

Support-03

Hello,
That's a great news.