SER6 6600h front USB3 issue

mycelium · 发表于 2023-01-19 03:33:03

Hi,

One of the front USB3 ports doesn't work properly. When I connect any drive to it, not matter what kind; external drive, flash drive, etc. The system doesn't recognize it. However I can see the led light going on and even hear/feel hdds spinning initially but they never get recognized by Windows; they don't show up in Windows Explorer or Disk Management. It's the port in between the USBC and the other USB3, so the one in the middle. Any ideas?

mycelium · 发表于 2023-01-27 11:06:44

traihan replied at 2023-01-24 04:37
Tried resetting BIOS?

I did, same problem persists. Now I realize it isn't only the front USB port, but also one on the back and it seems they all have problems when more than 3 are in use. Now Bluetooth is "dead", there's no way to turn it on/off nor is being recognized in Device Manager. I think this computer is just trash.

mycelium · 发表于 2023-01-22 14:09:15

Anyone having USB port problems?

Cleariati · 发表于 2023-01-22 15:01:54

mycelium replied at 2023-01-22 14:09
Anyone having USB port problems?

Lots of people are. All the latest machines released by Beelink seem to be having USB issues.

mycelium · 发表于 2023-01-23 22:09:31

I've just discovered that the BIOS recognize the drive, however Windows doesn't. BUT if I plug my phone it does recognize it..

traihan · 发表于 2023-01-24 04:37:56

Tried resetting BIOS?

Magister · 发表于 2023-01-28 03:46:51

If you still have a USB port working, try to make a USB bootable key with MXLinux or something, boot on the key, and check if the others USB are working?

ldblake · 发表于 2023-01-29 02:55:09

Magister replied at 2023-01-28 03:46
If you still have a USB port working, try to make a USB bootable key with MXLinux or something, boot ...

Look for a free program called USBTreeView ... it will give you info about the ports and devices that might be helpful.