Terible BIOS

jblack · 发表于 2021-09-04 13:15:02

I own a u55 (v23) and i have 2 big problems.first is, the boot process do not recognized. any ssd on the 2,5" connector. And it is not a wire problem, it is a terible bios because a old mechanical hdd will be recognized.
That is why i made an bios update. And here is the next bad thing.
I load the bios vor u55 and get a bios with folder u57_VB1V2X ON-1 ? At the end nothing good changed. the system shows the same bios as before but now the fan is always on at 100% and the system is terible loud.

Then i recognized, that i made a mistake because not only the revision number was changed :-(
on your Page the system numbers are completly different.
the Bios is for. : U55-A-XXXXUD0W64RPO-V23
my System is. : U55-F-XXXXCGOW64PRO-V23

is there a chance to get a working bios for my system?

beelink · 发表于 2021-09-07 13:37:30

Hello, about this issue please contact our after-sales email, our after-sales support staff will give you the correct BIOS file.

soscomputer2008 · 发表于 2021-09-21 22:17:32

you managed to fix the fan problem.
if so, how did you do it?

jblack · 发表于 2021-09-23 18:21:11

Edited by jblack at 2021-09-23 18:22

No, at this time i do not any work on the Fan. The support staff from beelink is not willing to send a other bios, they say that the one that i downloaded will work with my system and that is all. In the time between i install windows and osx 11.6 on a 1tb m.2 ssd. But if someone will also change the m.2 , the u55 do not accept nvme! Then i replaced the internal ssd wire with a straight 12pin 0.5p 10cm flat wire and voila, the u55 will find my intenso 128GB and sandisk 240 gb ssd on startup (but not my samsung evo870) So i will change to dualboot from 2 seperat ssd. i will make a post here if i change something with the fan ...

jblack · 发表于 2021-09-24 12:44:55

Bad News for the Fan problem, i found a conversation between Beelink and a other User. U55 original has a aktiv Fan controlling in BIOS. U57 is at always 100% on programmed and beelink says that must be because of thermal protection.
So everyone that uses VB1_0009200708_U55-A for V22 or V23 be aware, you choose a BIOS that is also for U57 and the Fan will be at 100% on if you flash this bios. I found a death link to a external solution and later the external solution itself:
http://forum.bee-link.com/forum. ... &extra=page%3D1

beelink · 发表于 2021-11-09 15:27:38

jblack replied at 2021-09-24 12:44
Bad News for the Fan problem, i found a conversation between Beelink and a other User. U55 original ...

Hello Dear.
The latest version of BIOS has optimized the fan issue, you can contact our after-sales staff, our after-sales staff will provide you with the correct BIOS version and burn-in guide.
Support-PC@bee-link.com