device bricked - burn successfully but doesn't start

gorotman · Post time 2020-08-02 14:56:12

Edited by gorotman at 2020-08-02 17:28

Hi all, I tried to reinstall latest firmware via usb because of problems with mouse pointer.
Now it doesn't start anymore.
Burn with amlogic burning tool ends succefully using GTKING_907P0.img on a 922 version (no prefix letter). I done it more times.

When I connect power cable device'eyes are red and becomes green immediatly. Usually they blinks red while booting.
I also tried the way to short two pins on pcb.

Any helps, suggestions, please?
thx

gatos814 · Post time 2020-08-03 07:16:27

Are you sure you flashed the proper firmware to your tv box according to the S/N ?

beelink · Post time 2020-08-03 09:15:08

Can you provide the SN code? And which firmware you flashed

gorotman · Post time 2020-08-04 03:32:32

Edited by gorotman at 2020-08-04 03:34

s/n 922XHQHF80040

First time I downloaded the galilei-ota-eng.member3.zip image for sd card from a sharepoint site (url found in this forum).
I copied this img on a usb key and loaded using update app on the device. Loading ended correctly but halted on next reboot.
Then I tried to burn the GTKING_907P0.img (same installed I had before update) using usb cable and amlogic burning tool.

I think that first firmware that i loaded from usb key was wrong version. My fault...but should be more useful if beelink organizes firmware versions and related requisite/instruction better than now.

Any idea to recover my gtking?

beelink · Post time 2020-08-04 09:42:38

gorotman replied at 2020-08-04 03:32
s/n 922XHQHF80040

First time I downloaded the galilei-ota-eng.member3.zip image for sd card from a ...

Hello, can you try the following firmware, if it still does not solve after installation, please contact me

Firmware: https://beelink-my.sharepoint.co ... mdi4NhxqJQ?e=qgEAkS

Tutorial: https://beelink-my.sharepoint.co ... mXivBqop-Q?e=Ge3Jnf

gorotman · Post time 2020-08-05 03:02:46

beelink replied at 2020-08-04 09:42
Hello, can you try the following firmware, if it still does not solve after installation, please c ...

IT WORKS....sorry...it works :)
I loaded firmware that you linked through amlogic burning tool and gtking turns on...thanks for your support, very appreciated

This is the last version available? OTA says that is already updated.
Now I came back to my original problem with wireless mouse...the reason of all this situation ...(see my other post if intersted).

teodim1 · Post time 2023-11-10 18:34:10

hello i have the gt king with s/n:SB9XH Burn with amlogic burning tool GTKING_926P0_wol_bt.img and complete successfully.When I connect power cable device'eyes are red and becomes green immediatly, and black screen on tv?Any helps, suggestions, please?
thx

gatos814 · Post time 2023-11-11 01:51:32

Edited by gatos814 at 2023-11-11 03:46

teodim1 replied at 2023-11-10 18:34
hello i have the gt king with s/n:SB9XH Burn with amlogic burning tool GTKING_926P0_wol_bt.img and c ...

First thoughts...
Have you check your power adapter ?
Have any other power adapter to test ?
Most D/C power adapters 12V / 1...1,5...2A from an old router will do for the test !
Try again to download the firmware via a download manager (just in case...)
Uninstall the UBT that you have used and try the procedure from the beginning with this UBTool :
https://mega.nz/file/Z4MmhRSJ#jw ... juHobue-RmbdK4xcp44
Good luck!

teodim1 · Post time 2023-11-11 04:00:51

gatos814 replied at 2023-11-11 01:51
First thoughts...
Have you check your power adapter ?
Have any other power adapter to test ?

Thanks for reply yes i check the power adapter with other try the tool but the same result.

gatos814 · Post time 2023-11-11 04:10:43

teodim1 replied at 2023-11-11 04:00
Thanks for reply yes i check the power adapter with other try the tool but the same result.

How did this happen ...?
Did you face any hardware issue or does this happened because you wanted to do an update ?