BIOS Option / Restart on AC Power Loss

pmshodan · 发表于 2017-04-29 15:53:08

The Beelink AP43 (and also the AP34) are great machines! But in order to use them properly as always-on servers, I would need them to reboot automatically after an AC power loss once the power is restored. Normally, you would find an option for that (Reboot on AC Power loss) in the BIOS, but the current BIOS does not contain such an option at all. Could you please add this in further BIOS releases?

jpg333 · 发表于 2017-05-02 18:47:50

Hi , I join the below request to obtain an updated firmware with restart AC loos option in Bios
thanks in advance
JP

Darksir · 发表于 2017-05-03 18:10:23

Hi , I join the below request to obtain an updated firmware with restart AC loos option in Bios
Interesting option :)
thanks in advance

moises · 发表于 2017-05-08 16:18:05

It would be great if they applied this option

Gasz2 · 发表于 2017-05-23 16:28:31

Mee too, If this option is added I sure buy AP34 or AP42

stevham · 发表于 2017-06-07 00:09:48

Have a problem. Have try a update for Bios but now after shutdown he won´t start, screen no signal, windows don´t start.

What can i do? What solve the problem. How can i reset?

Pls help me.

jyang825 · 发表于 2017-08-01 13:27:11

+1. Bought one AP34 already. Setting it as a server. But the lack of this feature (restart on power-on) is a showstopper. Will sure buy more (even many more) if this feature is available. Thanks!

enhompe · 发表于 2017-08-18 05:09:42

I need this feature! I would never have bought the Beelink if I had known auto-restart was missing!

invent · 发表于 2017-09-15 23:25:32

Hi , I join the below request to obtain an updated firmware with restart AC loos option in Bios
Interesting option
thanks in advance

JMsax · 发表于 2017-11-22 00:43:38

Beelink Staff, you really need to read these FORUM posts and respond to them. You have a great product here that we would use in large quantities (think 1,000 orders at a time) but cannot do so until you fix this issue of the system auto powering on in case of power failure.

Apparently this used to be an issue with the BT3 as well, but you fixed it in the v16 Bios release - See this link here: http://www.bee-link.com/Beelink-219-2-1.html

So, I have a couple questions:

1 - Are you ever going to make this change to the AP42 model? If not, please just tell us so that we can move on to a different product.

2 - If you ARE going to make this change, when will it happen?

3 - Can we use the BT3 V 16 BIOS on the AP42 to make this happen now?