Have I the last firmware in my new Beelink GT1

zz97f028 · 发表于 2017-03-18 17:56:04

Hello to everybody:

Sorry because my english is not too good. I have received yesterday my new Beelink gt1 2/32 GB. Searching in the menus i have seen that the firmware in my GT1 is named GT1_111MO. ¿Is this the last firmware?

I have tried to update the firmware but GT1 says me that i have the last firmware.

Thanks.

Regards.

rawj · 发表于 2017-03-19 00:32:50

As of today (18 March 2017) that is the latest released firmware.

zz97f028 · 发表于 2017-03-19 04:08:15

Thank yo ver y mutch

Magendanz · 发表于 2017-03-19 08:41:38

I have a friend who just received a new GT1 with 111M0 installed, and he sent me a snapshot so that I could build the Amlogic burn package. Unfortunately, it's the A912 version that uses the AP6255 wireless chipset (which I don't have). I did take a look and diffed it with the previous release, and it only had some minor changes to LightHome launcher and the camera. I was looking for an update to the Amlogic codec, but didn't see anything there to indicate that they've fixed the brightness bug yet.

Link to the GT1_111M0 AP6255 burn package (614MB .img file) : https://1drv.ms/u/s!AoqocX31ecnXgZQZDW3iXNlo8Hi7rw

If you have a unit with the Qualcomm QCA9377 wireless chipset (S/N beginning with S912 or G912), I'd very much like to build a burn package for that hardware. I'll just need you to install Terminal Emulator and type the following commands to get a snapshot of the three most important partitions:

$ su
# dd if=/dev/block/system of=system.raw
# dd if=/dev/block/boot of=boot.raw
# dd if=/dev/block/recovery of=recovery.raw

If you can create a ZIP archive of these three files and send me a link, I'll be able to post an Amlogic burn package for everyone and get started on a bunch of custom ROMs based on this new OEM release.

Magendanz · 发表于 2017-03-19 09:09:17

Or even better, Beelink could post the OTA update or burn package themselves and safe us all the trouble. (Hint, hint!)

Fijo1978 · 发表于 2017-03-19 18:57:05

Waiting Beelink to relesse OTA update...

kizer9 · 发表于 2017-03-19 21:23:58

Magendanz replied at 2017-03-19 08:41
I have a friend who just received a new GT1 with 111M0 installed, and he sent me a snapshot so that ...

Thx, I have an A912 firmware GT1.. How do I use this img to update to 111MO? Does it do a reset and will lose everything?

steelgtr · 发表于 2017-03-19 22:42:24

Magendanz replied at 2017-03-19 08:41
I have a friend who just received a new GT1 with 111M0 installed, and he sent me a snapshot so that ...

Which Beelink chip set is most desirable? Wireless chip the only difference?

thx

bob

Zyxious · 发表于 2017-03-20 01:51:15

I installed it yesterday. Still problem with dark scenes in Kodi. Still problems with PS4 controllers.

Zyxious · 发表于 2017-03-20 05:15:05

Not allowed to post the link without moderation. Just open Google.com and search for GT1_111M0. You will hit a SharePoint link where you can download the firmware.