SER 6 P, help with clean full windows installation

SER_JOSE

I did an emergency clean install but without a driver and it has given me a lot of problems I need help I could not find the drivers on the home page

tuiguang10

Hello Jose,

You can try to reset the system firstly:
1）Enter the safe mode, and reset the system.
          Start your PC, just as Windows attempts to load (spinning dots), press and hold Power Button for 5 - 10 seconds to perform a Hard Shut Down
          Do this many times until Windows  boots into the Recovery Environmen.

    2）If Windows will boot into the Recovery Environment and from there you can access System Repair, Safe Mode, Command Prompt . . . etc.
          Please try each option one at a time, then see of Windows will boot . . .
          Go to Troubleshoot - Advanced Option - Startup Repair
          See if Windows startup can repair itself
          Go to Troubleshoot - Advanced Option - System Restore
          Check to see if you have a restore point you can go back to         
          If you do not have a Restore Point, go to Troubleshoot - Advanced Option - Startup Settings and click Restart
         Upon restart, press 4 to enter Safe Mode
         Once in Safe Mode, backup your data if you do not already have a backup
         Open Device Manager and check to make sure all your Drivers are up to date
         Reboot to see if Windows will start Normally

   3）If the above fails, go to Troubleshoot - Advanced Options - Reset this PC
         Choose to keep your files and apps, just your files or to keep nothing
         Then start the Reset

If resetting the system does not solve the problem, it is recommended that you try to reinstall the system.
​This is the system file:  https://url.bee-link.cn/Lhec
​Here's the tutorial: https://url.bee-link.cn/s88O

Have a nice day!

soledad

Thanks tuiguang10 for the very detailed and specific instructions, I was also having the same problem and have now fixed the error.