Choice of boot screen

dds_fr_06 · 发表于 2024-05-14 21:46:49

Edited by dds_fr_06 at 2024-05-14 21:49

Hello,
I am using my GTR7 with the main screen connected to the HDMI port and the secondary screen to the Displayport.
I installed a multi-boot to boot either Windows 10 or Windows 11.
It seems that the boot screen (system choice) is always displayed on the screen connected to the Displayport.
Unfortunately as it is my secondary screen, it is not always on.
Is there a way to force the boot screen to be displayed on the screen connected to the HDMI port?
Thanks.

Derrick · 发表于 2024-05-14 23:32:20

The easiest way is to simply swap cables on the PC end.

dds_fr_06 · 发表于 2024-05-15 00:54:26

Thanks but this is not possible because my main screen only has an HDMI input.
I would have to put HDMI->Displayport and Displayport->Hdmi adapters on both cables!
And I'm not even sure it would work that way.
Is it not possible to define the display port in the bios?

tuiguang13 · 发表于 2024-05-15 09:12:50

Please go to display setting to adjust the main screen.

dds_fr_06 · 发表于 2024-05-15 14:23:19

I don't see this possibility in the GTR7 bios. Can you clarify where I can do this? THANKS

tuiguang13 · 发表于 2024-05-15 14:48:16

Pls right click the desktop,then you could see the display setting.

dds_fr_06 · 发表于 2024-05-15 16:06:42

I think you didn't understand my problem.
When turning on the GTR7, I cannot choose the operating system (Win10 or Win11) because the boot screen is displayed on my secondary screen connected to the Displayport which is turned off and which I only turn on when it is is necessary.
As there are 3 screens connections possibilities (HDMI, Displayport and USB-C), I would like to choose (in the bios?) on which port to display the boot screen.
Currently it is displayed primarily on the Displayport even if the attached screen is not powered on.

tuiguang13 · 发表于 2024-05-15 18:00:00

Sorry,there is no option in the bios.