Can't USB debug

gramenauer · 发表于 2023-07-03 05:41:48

Hello, I'm connecting a USB cable from my PC to my GT King, but nothing happens.

USB debugging is enabled on King.

Do I need a special USB(male) to USB(male) cable in order to connect my King to PC?

thank you.

Support-03 · 发表于 2023-07-03 21:05:25

Hello there,

Could you please send us a picture of SN on the bottom of the machine ?

gramenauer · 发表于 2023-07-06 03:43:29

Edited by gramenauer at 2023-07-06 03:45

Of course, here you are.
I've tried with many USB cables, none of them work. USB debugging is surely activated on device (in fact, tcp/ip debug is working correctly).

Support-03 · 发表于 2023-07-06 22:51:06

Hello there,

USB port cannot be used as a debugging function, it can only be debugged with network adb

gramenauer · 发表于 2023-07-07 02:07:58

Support-03 replied at 2023-07-06 22:51
Hello there,

USB port cannot be used as a debugging function, it can only be debugged with network ...

In android there is a way to change the USB behaviour from USB Host (current mode) to USB peripheral or accessible.
It could be done by changing this two config files:

android.hardware.usb.host.xml
android.hardware.usb.accessory.xml

Will it be possible to do it on rooted beelink gt king II, or it's a hardware limitation?

Thank you

Support-03 · 发表于 2023-07-07 22:39:44

gramenauer replied at 2023-07-07 02:07
In android there is a way to change the USB behaviour from USB Host (current mode) to USB peripher ...

Hi there,

It is hardware limitation