GR9 Bios Guide - processor's operating temperature

Euler

Hello goodnight!
Is there a screen-by-screen manual for each bios option?

I would like to know how it is possible to change the processor's operating temperature through the bios, since it is locked at 94°c and the processor supports up to 105°.

Through third-party programs on windows I can not change. I also can't through AMD's own programs.

Thank you very much in advance to everyone who can help!

rmarion59

Hmmm... I have not seen such a manual. You may take a look at AMD Adrenalin Edition from which you would be able to somehow bring changes to your mini PC.
https://www.amd.com/en/technologies/software
I hope it helps!

Euler

rmarion59 replied at 2022-10-10 10:25
Hmmm... I have not seen such a manual. You may take a look at AMD Adrenalin Edition from which you w ...

Thanks for answering! Unfortunately, I have already tried to use AMD Adrenalin Edition without success. I also tried using AMD Ryzen Master and it says it is not compatible with the installed processor (AMD Ryzen 5900hx).

rmarion59

I am also using the Beelink GTR5 5900HX.

AMD Ryzen 9 5900HX Drivers & Support
https://www.amd.com/en/support/apu/amd-ryzen-processors/amd-ryzen-9-mobile-processors-radeon-graphics/amd-ryzen-9-5900hx

I would go ahead and select the last option -> Auto-Detect and Install

I hope it helps!

Euler

rmarion59 replied at 2022-10-11 08:34
I am also using the Beelink GTR5 5900HX.

AMD Ryzen 9 5900HX Drivers & Support

Thank you my friend! I've already installed the AMD Adrenalin Edition on my machine since I opened the post, but unfortunately it doesn't offer the changes or the temperature options I'm looking for.

Even so, thank you very much for your attention!!

rmarion59

Hmm... I know few software e.g. AIDA64 or HwMonitor which can monitor temps but I dunno anything to make changes. If you find something, please let me know. Tschüss!

Euler

rmarion59 replied at 2022-10-11 08:58
Hmm... I know few software e.g. AIDA64 or HwMonitor which can monitor temps but I dunno anything to  ...

OK! I'll keep you posted, I sent an email to Support-PC@bee-link.com to ask for the full bios screen guide.

Euler

rmarion59 replied at 2022-10-11 08:58
Hmm... I know few software e.g. AIDA64 or HwMonitor which can monitor temps but I dunno anything to  ...

Hi! I bring updates:

I was answered as follows by support:

"Hello there,
It's impossible to change the processor's operating temperature through the bios."

So, with that, I'm still trying to get a step by step of the bios and I wrote by email:

"Thanks a lot for the feedback!

So I would like to get the bios screen-by-screen instruction manual to explore more and more the real bios functionality and its configuration possibilities.

In advance, once again, thank you very much!!"

jibunnokage

Sounds like the thermal tape between processor and heat sink/case is not set correctly.  Unfortunately, the internal fans can not be monitored by the OS on most of the BeeLink models because they do not support it, so most applications that read the BIOS/uEFI fan state fail on BeeLink mini PCs.  This lack of fan monitor/control is the #1 issue I have with BeeLink devices.  Are the fan(s) spinning all the time?  On my GT-7 the fans kick in at about 71-72 C, which is about right, even a bit sooner would be of benefit, actually.  I wish I could adjust this, but just not possible with the GT-7 design, and many other devices by BeeLink.

chairman67

jibunnokage replied at 2022-10-17 22:37
Sounds like the thermal tape between processor and heat sink/case is not set correctly.  Unfortunate ...

This lack of fan monitor/control is the #1 issue I have with BeeLink devices.

What about MinisForum brand.. do you know if their Mini PCs have fan speed sensor ability?

or is this a common trait with all these Mini PCs we just have to live with ? My conky will look incomplete without a fan speed RPM showing :(