GK 55 and the BIOS update for TPM2.0

misercomet · Post time 2022-01-20 01:21:10

I have read through the forums and there is a mention of a BIOS update to enable TPM2.0.
The support website and the forums do not link to this BIOS update.
Can someone post the BIOS update as a link for everyone to benefit from?

using linux, my BIOS reports as v5.13 with a date of 10/17/2020

root@beelink-gk55:~# lshw
   *-firmware
      description: BIOS
      vendor: American Megatrends Inc.
      physical id: 0
      version: 5.13
      date: 10/17/2020
      size: 64KiB
      capacity: 5MiB
      capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb

slabuta · Post time 2022-01-21 03:33:48

I believe there are multiple versions of BIOS depending on your exact hardware. Write a request for the updated BIOS to Bee-Link support at support-pc@bee-link.com and they will ask you for some photos of your mainboard to check its version and of some of the other chips. When they receive that, they will give you a link to the proper BIOS for your unit. That's what they did for me.

misercomet · Post time 2022-01-25 22:11:07

well, it's been 5 days since I responded to their request for pictures of the motherboard and serial number... so I sent them a reminder email... and... it's Chinese New Year... guess I wont hear back until February now.

-----
Our office will close for the Chinese New Year Holiday on January 25th and will resume business as usual on February 8th .
-----

misercomet · Post time 2022-02-01 22:07:11

they finally wrote me back today, February 1st with a link to the BIOS.
I will try it out tonight and respond back tomorrow to let you know if this enabled my TPM.

misercomet · Post time 2022-02-02 06:03:05

so I chose the EFI boot option, since I'm running linux, instead of the Windows binary.
it launched startup.nsh without issue and found a winbond flash chip:  W25Q128FW
After it finished programming, doing ctrl-alt-del did not see to "reboot" the box.  So I power cycled it instead.
There was roughly a 2 minute wait during the next boot cycle while the BIOS seemed to be initializing.
The TPM menu was now available within the BIOS.

What I find amusing is that the version number didn't change, but the date did:
From 10/17/2020 to 10/10/2021
-----
  *-core
   description: Motherboard
   product: GK55
   vendor: AZW
   physical id: 0
   version: Default string
   serial: Default string
   slot: Default string
   *-firmware
      description: BIOS
      vendor: American Megatrends Inc.
      physical id: 0
      version: 5.13
      date: 10/10/2021
      size: 64KiB
      capacity: 5MiB
      capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb biosbootspecification uefi

dmesg shows TPM at boot now:
-----
[ 0.009159] ACPI: TPM2 0x00000000799A4000 000034 (v04 ALASKA A M I 00000001 AMI  00000000)
[ 0.009224] ACPI: Reserving TPM2 table memory at [mem 0x799a4000-0x799a4033]

-----
root@beelink-gk55:~# cat /sys/class/tpm/tpm*/tpm_version_major
2

beemelon · Post time 2023-09-20 17:30:07

I'll test it out tonight and reply to let you know if it activated my TP the following day.

TrentMoody · Post time 2024-09-03 18:56:45

If you can't find the BIOS update online, it might be worth reaching out to the manufacturer's customer support. Provide them with your current BIOS version and the issue you're facing.