M bricked

Elio · 发表于 2021-01-09 14:52:52

I have made a bios update but now my Gemini M is bricked . Do you have a solution ?

Sousinha · 发表于 2021-01-15 22:35:23

If I was you i will try to contact Beelink.

Sousinha · 发表于 2021-02-02 10:29:15

Have you try to do a bios factory settings return with reset button? I did it and all is perfect!!!! I love Beelink

Un_ · 发表于 2021-02-09 01:36:35

Hi

,

I have the same problem as Elio (box bricked).
From M41N 1.00 to M41N 1.06

Solution proposed by Sousinha does not work (press reset button and connect).

Does anyone have a solution? Thank you

beelink · 发表于 2021-03-03 17:35:47

Un_ replied at 2021-02-09 01:36
Hi ,

I have the same problem as Elio (box bricked).

Sorry for not replying in time
Could you describe your problem in details?
We will feedback it to the techniacns

beelink · 发表于 2021-03-03 17:35:53

Sorry for not replying in time
Could you describe your problem in details?
We will feedback it to the techniacns

Un_ · 发表于 2021-03-13 22:26:29

Hi Beelink
The problem is very simple. The PC does not start : The LEDs remain on continuously, the fan is on, but nothing on the screen. The Bios is not running.
is there a way:
- reinstall BIOS from another PC?
- Reprogram the chip containing the launch program?
- Other solution ?
A PC, even mini, necessarily has a solution to resolve this malfunction.
Thank's

beelink · 发表于 2021-03-15 09:19:51

Un_ replied at 2021-03-13 22:26
Hi Beelink
The problem is very simple. The PC does not start : The LEDs remain on continuously, the ...

Is there a signal? Please check the line and interface?
Is this question suddenly happened?

Un_ · 发表于 2021-03-16 19:28:41

Hello,

Thank you for your involvement.

Yes I checked line and interface. All is OK.
before updating the bios everything was OK.
After that, nothing works.

But, If beelink is a serious brand (of AZW), this PC surely has a BIOS (UEFI AMI) recovery / reset facility . Do you agree ?

Best Regards

beelink · 发表于 2021-03-17 14:23:45

Un_ replied at 2021-03-16 19:28
Hello,

Thank you for your involvement.

I asked the technicians, the machine may be broken due to a mistake in flashing bios
Please try to disconnect the power, and then connect the power to boot after 10 minutes, try whether you can enter the bios or press F7 to check if it can work
If it can't work, then your machine is broken