Internet speed

vjeko_os

i installed new update 2 days ago and ever since my internet speed is extremly slow. i connect box with lan cable.before update speed was 60mbps and after i install update speed is onli 9mbps! can i delete new update and use my box without that new update?

beelink

Hello，We really want to solve your problem, can you tell me, this problem appears after updating the firmware to 910P0? Has this problem occurred on both Ethernet and WIFI networks?

vjeko_os

Yes 910P0_wol is firmware.no only on ethernet

beelink

vjeko_os replied at 2020-05-24 03:14
Yes 910P0_wol is firmware.no only on ethernet

Hi，
In the 910P0 firmware update, we did not modify the network link, so usually this will not happen, you can re-burn the firmware, after re-burning to check whether it can be used normally.

vjeko_os

How to re-burn firmware? And witch firmware to download?

beelink

vjeko_os replied at 2020-05-26 03:32
How to re-burn firmware? And witch firmware to download?

Please check the link below and follow the burning guide in the link to burn the firmware in the link

http://bee-link.com/forum.php?mo ... &extra=page%3D1

gtkingpro.ac2n

I think I have the same problem with the download speed wired in RJ45, I also noticed that when I start the box and I arrive on the home launcher, I have a black screen that appears and then everything comes back normal. .
Another small detail I carried out an OTA update and at the end of the process I had a message like what the update was already installed, strange ..
In addition I had a problem with the dual-boot on my TF card, I had to reflash the card and especially strange thing I can only boot Coreelec with the old DTB version which normally is intended for GT-King … When I use the DTB for GT-King Pro I have a black screen or a screen all weird, striated but nothing readable ..

gtkingpro.ac2n

Hi, so I re-flash 910P0 on my gt-king pro but this time with my computer and no more problem with internet speed..
Problem solved for me ...

However Coreelec can only boot if I use the old DTB version (* .rev_a.dtb), still impossible to use the one normally provided for the gt-king pro like CoreeIec team said to me.. I think the concern is that the DTB version gt-king pro was done with the processor at 2.2Ghz and that finally as beelink had to retrograde the proc. at 1.8Ghz we must therefore use the version * .rev_a.dtb to be able to boot on Coreelec .. but it works ...