GT-King Pro firmware: 910P0

kostik123

beelink replied at 2020-07-04 10:46
Does your monitor support 2160p60hz? If it does not support it will not appear in the settings

have it set in the TV Hisense H55U7A so I don't know why I only have 1089p60hz and RGB in the settings.  I have Beelink for two months.  Can you advise me on what to do.  It's not a FW mistake .... Otherwise I wrote you a private message and the serial number of my box.

kostik123

beelink replied at 2020-07-04 10:46
Does your monitor support 2160p60hz? If it does not support it will not appear in the settings

I used to have an X88 Max Plus HDMI TV box in this same input and there was a full 4K resolution of 3840p-2160hz and after connecting Beelink GT King Pro only FullHD 1920p-1080hz in Droid setting and color resolution only RGB, YPbPr444 and YPbPr422 are still missing. .., can you explain it to me somehow. There must be some firmware error on your part.
I still have GT King on the second TV and it's okay there.
Read my private message I sent you. You will solve it somehow, the box is quite expensive so I expected it to be good quality, now I'm a little disappointed ...
Could you, as a representative of Beelink, answer me ???

kostik123

beelink replied at 2020-07-04 10:46
Does your monitor support 2160p60hz? If it does not support it will not appear in the settings

Good evening, I have to apologize to you because it's my fault.  HDMI cable somal in the wind where the resolution is only 1020x1080.  After moving the HDMI cable to input 4, I have a resolution of 3840x2160 HDR, ie a bad connection on my part.  I'm so sorry again

beelink

kostik123 replied at 2020-07-06 06:48
Good evening, I have to apologize to you because it's my fault.  HDMI cable somal in the wind wher ...

I'm sorry I didn't give you an accurate opinion, but it's good to see your problem solved

kostik123

beelink replied at 2020-06-18 15:23
Please be patient, we will do it as soon as possible.

Hello, you are missing the "Picture" item in the droid settings to adjust the brightness, etc ... Please fix it in a future update.  It's for the GT King Pro SA9H

beelink

kostik123 replied at 2020-07-10 23:34
beelink replied at 2020-06-18 15:23
Please be patient, we will do it as soon as possible.

Thanks for your suggestions, we will record

kostik123

beelink replied at 2020-07-11 10:15
Thanks for your suggestions, we will record

The same goes for the cheaper GT King variant

beelink

kostik123 replied at 2020-07-11 19:53
The same goes for the cheaper GT King variant

thanks

FSevilha

Hello

My box is a GT-King Pro Amlogic S922X-H rev.a

I update the firmware to the new 910P0, bur i use the GTKing_910P0 img, after that my box don´t play the audio correctly.

The headphones exit don´t have sound, the audio passtrouth HDMI only pass in 2 channel´s.

I make the mistake to change to another software version that is not compatible whith my box GT-King Pro not the Gt-King.

I try to install the correct img (GT-King Pro firmware: 910P0) but is an error because the date is old (18-5-2020) that the (GT-King firmware for B922 and 922X: 910P0) (4day's) ago.

Can help me to solve this.

Tank´s

F.Sevilha

beelink

FSevilha replied at 2020-08-14 18:18
Hello

My box is a GT-King Pro Amlogic S922X-H rev.a

Can you try the following process，settings driod >settings> audio output，Change sound output options