|
|
Edited by Phant0m`` at 2020-01-02 01:08
Glossary
----------------------------
| HwID | Partial Serial Number | * First Four Digits of the Serial Number, found underneath of the unit.
| Based-On | Use this information to determine if you can apply SD Card firmware update package or you
required to use USB firmware package. If firmware package build is 708N0, and Based-On shows 707N0.
However you have 706N0 or lower Build installed, then you must use FOTA upgrading or you must use USB firmware package instead.
----------------------------
Latest Beelink LightHome Crashing & Weather Widget patch
Notes: Apply this everytime you upgrade firmware. There's patch for both GT1 Standard, and Ultimate Editions.
Patch for both Android versions, Android 6 and one for Android 7
********* Official Beelink forum post: http://www.bee-link.com/forum.ph ... 48302&fromuid=18779
Firmware Packages ( HwID: A912 & AX12 w/(AP6255) Wireless | Upgrades Firmware Builds ???N0 )
*****************
Beelink GT1 Standard & Ultimate Editions
Build: 708N0 | Released on: January 16th, 2017
Based-On: GT1_707NO
Android Version: 7.1.2
OTA (Over-The-Air) Released: Yes
SD Card Upgrading: Yes
EPROM Firmware: Yes
Release Notes:
1. Optimization system.
2. Update Beelink File Manager.
3. RGB has been added to this firmware
4. Add shortcut icon app.
5. You can get into the recover mode by pressing the reset button.
6. You can get the permissions for unroot firmware now.
7. Fix the picture when the wallpaper is set up.
8. Fix the problem of single image setting wallpaper error in file manager.
9. Increase the rotary screen on or off option.
10. Remove the shutdown dialog when sleeping wake up, cancel any key wake up.
11. Limit SuperSu installation.
12. We updated the FOTA apk for you.
13. The third-party apps can get the read permessions now.
14. Add the output frame rate to adapt the frame rate of the input video source.
15. The version number is changed to 708N0.
Official Link: http://www.bee-link.com/forum.ph ... 41745&fromuid=18779
---
Beelink GT1 Standard & Ultimate Editions
Build: 707N0 | Released on: November 9th, 2017
Based-On: GT1_706NO
Android Version: 7.1.2
OTA (Over-The-Air) Released: Yes
SD Card Upgrading: Yes
EPROM Firmware: Yes
Release Notes:
1. The Ethernet MAC address can be shown in setting.
2. Some repeated options have been cleared already.
Official Link: http://www.bee-link.com/forum.ph ... 27078&fromuid=18779
---
Beelink GT1 Standard & Ultimate Editions
Build: 706N0 | Released on: N/A
Based-On: N/A
Android Version: N/A
OTA (Over-The-Air) Released: N/A
SD Card Upgrading: N/A
EPROM Firmware: N/A
Release Notes:
N/A
Official Link: N/A
---
Beelink GT1 Standard & Ultimate Editions
Build: 705N0 | Released on: September 24th, 2017
Based-On: GT1_704NO
Android Version: 7.1.2
OTA (Over-The-Air) Released: Yes
SD Card Upgrading: Yes
EPROM Firmware: Yes
Release Notes:
1. The boot static logo has been updated.
2. The main page has been designed again , we have added some buttons and the right app icons to the main page.
3. The navigation bar and the status bar will be available for using again.
4. The system stability has been improved already.
5. We have also improved the stability of BT connection.
6. The problem that wifi can't be used though it is connected well has been solved.
7. The new play store app has been installed in advance for popular demands , also , the previous one will be reserved in your tv box.
8. The Beelink file browser and the music player have been updated well.
Official Link: http://www.bee-link.com/forum.ph ... 26524&fromuid=18779
---
Beelink GT1 Standard & Ultimate Editions
Build: 704N0 | Released on: August 24th, 2017
Based-On: GT1_703NO
Android Version: 7.1.2
OTA (Over-The-Air) Released: Yes
SD Card Upgrading: Yes
EPROM Firmware: Yes
Release Notes:
1. Application of vertical screen shows full.
2. Integrate AurtoReboot.apk.
3. On the main interface, please continuously press the Key 8 on remote three times to enable AutoReboot.apk.
4. There is no icon of AutoReboot.apk in APP List.
Official Link: http://www.bee-link.com/forum.ph ... 18714&fromuid=18779
---
Beelink GT1 Standard & Ultimate Editions
Build: 703N0 | Released on: July 19th, 2017
Based-On: GT1_702NO
Android Version: 7.1.2
OTA (Over-The-Air) Released: Yes
SD Card Upgrading: Yes
EPROM Firmware: Yes
Release Notes:
1. Improve the problem of "the setting interface is opended slowly".
2. Improved the problem of "the bluetooth can't be connected with the Android smart phone".
3. Improved the problem of "the other button is valid when you have a long press on the Menu button under the home inerface".
4. Supports the AirPlayer IOS 10.
Official Link: http://www.bee-link.com/forum.ph ... 13948&fromuid=18779
---
Beelink GT1 Standard & Ultimate Editions
Build: 702N0 | Released on: June 28th, 2017
Based-On: GT1_702N0_3G
Android Version: 7.1
OTA (Over-The-Air) Released: Yes
SD Card Upgrading: Yes
EPROM Firmware: Yes
Release Notes:
1. Fits for DDR4 3G and DDR3 2G.
Official Link: http://www.bee-link.com/forum.ph ... 13738&fromuid=18779
|
|
Post time 2019-12-26 09:03:32