|
I have solved this by using Superceleron's Beelink GT1 beta v5 firmware and following the instructions in post #617 of the firmware thread on the freaktab forum to fix the XBOX 360 wireless controller. The PS3 controller did not require any changes and worked out of the box on the v5 firmware and the Sixaxis Controller app from Dancing Pixel Studios.
Here are the instructions from Superceleron:
1) Install Xposed Additions(latest one). Once it's installed, go back to the Xposed Installer, this time selecting "Modules" from its main menu. Tick the box to the right of Xposed Additions (don't tap the name - look for the checkbox and tap that), then reboot again when prompted.
2) After reboot, go to "all apps"(where are all you device installed apps...) and execute Xposed Additions to go to its configuration screen.
3) Select "Buttons", then "Allow External Devices", and tick everything.
4) In the "Keys" section lower down, select "Add new Key", then press left on your controller's dpad. Once you press Ok, DPad Left should show up with "no conditions". Tap it, and "Add new Condition" in there select "screen on", and the "no conditions" now should say "1 condition".
5) close everything |
|