WiFi Fixed On My GT1. 02:00:00 MAC Address Solved

Rccm112

This is a bit rushed, but I couldnt help but share this. I will edit it later and maye add some pics. For weeks I have been trying to get rid of the 02:00:00:00:00:00 mac address and ge tmy wifi working again.

First you will need to open your box up and look on your wifi chip. The mac address is the 12 digits printed on it. Take a picture or write it down or something. Note that you simply need to put a   :  symbol between pairs of numbers.

Download the current firmware for your box. Pick the correct one according to your serial number. My GT1 Standard has an s912 serial so I use the 708N0_LTM variant.

Now download and install Amlogic Customization Tool
Press the Load button to load your firmware into the tool.
Check Setting Key
Navigate to your firmware
Press the Keys tab
Check the mac_wifi.ini box
Press the setKeycfg button
No press the pack button
Save the firmware as a different name than the original GT1_wifiFix.img for example.

Create a text file named mac_wifi.ini. Insert the following text and save it to the  C:\Program Files\Amlogic\USB Burning Tool\license folder. If there isnt a folder named license create one. Replace the  Group 1 start end, and current MAC Address with your own MAC address. Leave Group 2 alone. My WiFi MAC Address is the same as the Bluetooth MAC Address accept the last pair on the WiFi MAC Address is one hexadecimal higher than the BT MAC Address.

[Group1]
start = 74:c6:3b:fe:a2:XX
end = 74:c6:3b:fe:a2:XX
total = 16777038
used = 10
current = 74:c6:3b:fe:a2:XX


[Group2]
start = 00:0f:a3:45:08:12
end = 00:0f:a3:45:08:34
total = 34
used = 5


[fragment]
fragment =




Download and install USB Burning Tool.
Load the GT1_wifiFix.img firmware you created with .
Check the following boxes erase flash , normal erase, erase bootloader, overwrite keys , mac_wifi
Connect your GT1 to your PC while holding the recovery button.
Release the button when you see the stataus change to connected.
Click Start
Let it finish.
Press Stop.
Unplug the box.
plug your GT1 into your tv (you will have a mac address, but no wifi)
Load the original firmware for your box into USB Burning Tool.
Check the following boxes erase flash , normal erase, erase bootloader.
UNCHECK overwrite KeysUNCHECK mac_wifi
Connect your GT1 to your PC while holding the recovery button.
Release the button when you see the status change to connected.
Click Start
Let it finish
Plug your box into your tv and connect your wifi


You should have your mac address back and wifi should be working as well.