EFI Boot Menu Key Sequence

WaiverWireAddic · 发表于 2019-03-20 23:59:39

Hi, I want to re-install Windows 10. I do this with all my new PCs, to prove that I can get Windows going again from scratch in case I have to replace the HD. I wanted to know what key sequence I should press in order to enter the EFI boot menu so I can choose to boot from the stick. Also what tool do you recommend to create the bootable USB stick. I use Rufus, but I have seen posts for the other models using UltraISO. I tried the Windows Media Creation tool, but the system will not boot at all when a stick created with it is inserted. I am generally very pleased with the unit, but am a technical user, and would like to confirm I can re-install the OS, as needed. I assume that the system (since it's activated) has a digital license, that will let me re-install the OS without a key.

Mordekaiser · 发表于 2019-03-21 19:01:55

Do you need this
WIN10 1809 home
https://mega.nz/#!mjpkXKJT!dbCpm ... Tbk5JArTkXdPXgqQjzc

WaiverWireAddic · 发表于 2019-03-21 21:53:49

The activated copy of Windows 10 on my J45 is Windows 10 Pro. But, whenever a USB disk device (a bootable on non-bootable one) is plugged in on boot, the unit doesn't seem to boot, and I get no video at all. I remove the device (an external 12 TB data drive for instance), and pretty quickly I get booted into Windows. What I am looking for is the key sequence, or other technical information (a manual would be great) to get into a BIOS/UEFI menu to let me choose the boot device. I can't seem to trigger that menu.

Mordekaiser · 发表于 2019-03-22 14:33:56

WaiverWireAddic replied at 2019-03-21 21:53
The activated copy of Windows 10 on my J45 is Windows 10 Pro. But, whenever a USB disk device (a bo ...

System installation tutorial

Gemini J install windows 10 tutoria.pdf (413.46 KB, 下载次数: 889)

WaiverWireAddic · 发表于 2019-03-24 23:10:14

Hello, I have resolved this problem. The problem was occurring because i had the unit connected to it's keyboard and monitor via an IOGEAR model GCS62HU KVM. When I hooked the unit up without the KVM, I see the normal menu prompts on boot. I post this in case anyone else makes my mistake, or in case you are curious to figure out why hooking up through a KVM (or that KVM) effectively suppress the EFI boot menu. Thank you for your time looking into this. I imagine it must have been a strange post to you.

melinrafn · 发表于 2019-04-26 19:44:57

@WaiverWireAddic
I had simular issue. First it didn't detect any usb boot deviced I connected. After I changed the boot type in BIOS from UEFI to LEGACY it was able to detect them, but during boot, all went black. Strangely enough after I changed the boot method back to UEFI he was able to detect the USB drives and boot from USB.