Dead Drive, looking for Bios settings to use Winto USB for SATA 3 hard drive.

Ogre · 发表于 2018-11-27 05:30:34

Edited by Ogre at 2018-11-27 05:30

I am looking for the Bois settings to use WIN to USB and boot a SATA 3 SSD in an external case. I have Win to USB running on a usb flash drive. Was hoping you have the bios setting to make this run faster since I can not remove my internal mSATA ssd, stuck screw.

May I also suggest you open a replacement parts departemnt for replacement system boards with no attached drives ( just the mother board ) as the shipping back to China costs more than buying a new unit.

Thank You

Ogre · 发表于 2018-11-27 12:07:20

Neve rmind. I figured out how to get an Internal SATA 3 SSD hard drive to boot without removing the broken MSATA drive.

Ogre · 发表于 2018-11-27 12:09:00

The drive I used is an Inland Professional I bought from Micro Center in my city. Now this thing runs faster than when I first got it new. Also I have Windows 10 version 1809 running .

rezmus · 发表于 2018-11-27 16:07:40

so you connected 2.5" ssd drive inside box to sata3 interface? can you make a benchmark with crystaldiskmark (https://crystalmark.info/en/software/crystaldiskmark/)? some ppl here have problems with internal 2.5" drive read speeds.

rezmus · 发表于 2018-11-27 16:08:56

Edited by rezmus at 2018-11-27 16:12

it's 2.5" drive connected with sata cable? can you bench it with crystaldiskmark?

some ppl have slow read speeds with internal 2.5" www.bee-link.com/forum.php/forum.php?mod=viewthread&tid=42548

Ogre · 发表于 2018-11-28 05:01:42

-----------------------------------------------------------------------
CrystalDiskMark 6.0.2 x64 (C) 2007-2018 hiyohiyo
                        Crystal Dew World : https://crystalmark.info/
-----------------------------------------------------------------------
* MB/s = 1,000,000 bytes/s [SATA/600 = 600,000,000 bytes/s]
* KB = 1000 bytes, KiB = 1024 bytes

Sequential Read (Q= 32,T= 1) : 505.015 MB/s
  Sequential Write (Q= 32,T= 1) : 489.691 MB/s
  Random Read 4KiB (Q=  8,T= 8) : 337.959 MB/s [  82509.5 IOPS]
Random Write 4KiB (Q=  8,T= 8) : 279.746 MB/s [  68297.4 IOPS]
  Random Read 4KiB (Q= 32,T= 1) : 114.633 MB/s [  27986.6 IOPS]
Random Write 4KiB (Q= 32,T= 1) : 106.451 MB/s [  25989.0 IOPS]
  Random Read 4KiB (Q=  1,T= 1) : 32.024 MB/s [ 7818.4 IOPS]
Random Write 4KiB (Q=  1,T= 1) : 65.082 MB/s [  15889.2 IOPS]

  Test : 1024 MiB [C: 16.5% (18.4/111.2 GiB)] (x5)  [Interval=5 sec]
  Date : 2018/11/27 15:57:00
OS : Windows 10  [10.0 Build 17134] (x64)

-----------------------------------------------------------------------
CrystalDiskMark 6.0.2 x64 (C) 2007-2018 hiyohiyo
                        Crystal Dew World : https://crystalmark.info/
-----------------------------------------------------------------------
* MB/s = 1,000,000 bytes/s [SATA/600 = 600,000,000 bytes/s]
* KB = 1000 bytes, KiB = 1024 bytes

here are the speed tests on the drive.
I just did a copy and paste, never did a picture post.
I spent $20 ON THE DRIVE AND $10 ON THE USB 3 box with cable.
I even got the drive to boot from usb 3 box

Ogre · 发表于 2018-11-28 05:06:18

-----------------------------------------------------------------------
CrystalDiskMark 6.0.2 x64 (C) 2007-2018 hiyohiyo
                        Crystal Dew World : https://crystalmark.info/
-----------------------------------------------------------------------
* MB/s = 1,000,000 bytes/s [SATA/600 = 600,000,000 bytes/s]
* KB = 1000 bytes, KiB = 1024 bytes

Sequential Read (Q= 32,T= 1) : 505.015 MB/s
  Sequential Write (Q= 32,T= 1) : 489.691 MB/s
  Random Read 4KiB (Q=  8,T= 8) : 337.959 MB/s [  82509.5 IOPS]
Random Write 4KiB (Q=  8,T= 8) : 279.746 MB/s [  68297.4 IOPS]
  Random Read 4KiB (Q= 32,T= 1) : 114.633 MB/s [  27986.6 IOPS]
Random Write 4KiB (Q= 32,T= 1) : 106.451 MB/s [  25989.0 IOPS]
  Random Read 4KiB (Q=  1,T= 1) : 32.024 MB/s [ 7818.4 IOPS]
Random Write 4KiB (Q=  1,T= 1) : 65.082 MB/s [  15889.2 IOPS]

  Test : 1024 MiB [C: 16.5% (18.4/111.2 GiB)] (x5)  [Interval=5 sec]
  Date : 2018/11/27 15:59:03
OS : Windows 10  [10.0 Build 17134] (x64)

First time using a bench mark test. How do I get it to copy the picture and post it ?

Ogre · 发表于 2018-11-28 05:08:38

-----------------------------------------------------------------------
CrystalDiskMark 6.0.2 x64 (C) 2007-2018 hiyohiyo
                        Crystal Dew World : https://crystalmark.info/
-----------------------------------------------------------------------
* MB/s = 1,000,000 bytes/s [SATA/600 = 600,000,000 bytes/s]
* KB = 1000 bytes, KiB = 1024 bytes

Sequential Read (Q= 32,T= 1) : 505.015 MB/s
  Sequential Write (Q= 32,T= 1) : 489.691 MB/s
  Random Read 4KiB (Q=  8,T= 8) : 337.959 MB/s [  82509.5 IOPS]
Random Write 4KiB (Q=  8,T= 8) : 279.746 MB/s [  68297.4 IOPS]
  Random Read 4KiB (Q= 32,T= 1) : 114.633 MB/s [  27986.6 IOPS]
Random Write 4KiB (Q= 32,T= 1) : 106.451 MB/s [  25989.0 IOPS]
  Random Read 4KiB (Q=  1,T= 1) : 32.024 MB/s [ 7818.4 IOPS]
Random Write 4KiB (Q=  1,T= 1) : 65.082 MB/s [  15889.2 IOPS]

  Test : 1024 MiB [C: 16.5% (18.4/111.2 GiB)] (x5)  [Interval=5 sec]
  Date : 2018/11/27 15:59:03
OS : Windows 10  [10.0 Build 17134] (x64)


Sorry , but this is the first time I have tried to post a benchmark test. How do I get a better picture?
-----------------------------------------------------------------------
CrystalDiskMark 6.0.2 x64 (C) 2007-2018 hiyohiyo
                        Crystal Dew World : https://crystalmark.info/
-----------------------------------------------------------------------
* MB/s = 1,000,000 bytes/s [SATA/600 = 600,000,000 bytes/s]
* KB = 1000 bytes, KiB = 1024 bytes

Sequential Read (Q= 32,T= 1) : 505.015 MB/s
  Sequential Write (Q= 32,T= 1) : 489.691 MB/s
  Random Read 4KiB (Q=  8,T= 8) : 337.959 MB/s [  82509.5 IOPS]
Random Write 4KiB (Q=  8,T= 8) : 279.746 MB/s [  68297.4 IOPS]
  Random Read 4KiB (Q= 32,T= 1) : 114.633 MB/s [  27986.6 IOPS]
Random Write 4KiB (Q= 32,T= 1) : 106.451 MB/s [  25989.0 IOPS]
  Random Read 4KiB (Q=  1,T= 1) : 32.024 MB/s [ 7818.4 IOPS]
Random Write 4KiB (Q=  1,T= 1) : 65.082 MB/s [  15889.2 IOPS]

  Test : 1024 MiB [C: 16.5% (18.4/111.2 GiB)] (x5)  [Interval=5 sec]
  Date : 2018/11/27 16:08:27
OS : Windows 10  [10.0 Build 17134] (x64)

Ogre · 发表于 2018-11-28 11:56:25

rezmus replied at 2018-11-27 16:08
it's 2.5" drive connected with sata cable? can you bench it with crystaldiskmark?

some ppl have slo ...

-----------------------------------------------------------------------
CrystalDiskMark 6.0.2 x64 (C) 2007-2018 hiyohiyo
                        Crystal Dew World : https://crystalmark.info/
-----------------------------------------------------------------------
* MB/s = 1,000,000 bytes/s [SATA/600 = 600,000,000 bytes/s]
* KB = 1000 bytes, KiB = 1024 bytes

Sequential Read (Q= 32,T= 1) : 503.657 MB/s
  Sequential Write (Q= 32,T= 1) : 489.513 MB/s
  Random Read 4KiB (Q=  8,T= 8) : 321.635 MB/s [  78524.2 IOPS]
Random Write 4KiB (Q=  8,T= 8) : 276.329 MB/s [  67463.1 IOPS]
  Random Read 4KiB (Q= 32,T= 1) : 118.935 MB/s [  29036.9 IOPS]
Random Write 4KiB (Q= 32,T= 1) : 108.806 MB/s [  26564.0 IOPS]
  Random Read 4KiB (Q=  1,T= 1) : 29.933 MB/s [ 7307.9 IOPS]
Random Write 4KiB (Q=  1,T= 1) : 65.911 MB/s [  16091.6 IOPS]

  Test : 1024 MiB [C: 16.8% (18.6/111.2 GiB)] (x5)  [Interval=5 sec]
  Date : 2018/11/27 22:55:52
OS : Windows 10  [10.0 Build 17134] (x64)


I hope this helps

Dead Drive, looking for Bios settings to use Winto USB for SATA 3 hard drive.

浏览过的版块