Help required for Beelink GT1 Ultimate

Kashif

Please send me links of image files of all firmware's for USB Burning tool. as I am still to flash from SD Card,

And also confirm me if you have any service center in Pakistan or any forum member who can help me.
I'll really appreciate, if you ll help me to fix my box,

Phant0m``

Kashif replied at 2017-09-10 13:56
Please send me links of image files of all firmware's for USB Burning tool. as I am still to flash f ...

What is wrong with the links I've already provided you...?

Phant0m``

I've already explained in pretty thorough way how to fix your issue. If you refuse to pay attention, and refuse to-do the leg work, don't expect others going to jump in here to your aid.

Kashif

Dear Admn.
I have done exactly same, as you have explained above but nothing happend...........:'(

May be i have made any mistake in preapering bootable SD Card, please check the above snaps attached for your reference and confirm me which .img file should I chose and attach in Burn Card Maker to make my SD card bootable.

Phant0m``

Snaps aren't appearing. Anyways, you need to keep testing from newest to oldest Android 6 firmwares. You don't know what firmware you had on previously, so you'd have to cycle through. When you have the correct firmware package to match the firmware you previously was with, it'll work.

If you can use the USB Burning Tool, download the latest firmware package either for Android 6 or 7 and do it that way.

Kashif

EPROM Firmware must be in .img file to browse the same in Burn Card Maker.

As I ve download all firwares with these 3 files which I sent to the details and there is only recovery.img file and other one is zip folder.
how to make bootable SD card????

Kashif

in every downloaded Firmware link there are 2 files and 1 zip file
1. factory_update_param.aml
2. q201_9377-ota-20170227 (its .zip folder)
3. recovery.img (its only .img file)

now I have to browse and attach EPROM firmware .img file to make my SD card bootable.
bur there is no .img firmware file accept recovery.img file???????????????????

Please guide me

Phant0m``

EPROM package is the USB one, not the SD Card one...

Kashif

then what about the SD card????

Phant0m``

All the instructions giving repeatedly is for EPROM, not the SD Card upgrading method. You use the Burn Card Maker and make bootable SD Card via EPROM firmware ( known as the USB package. )