Please help me to update. GT1 Ultimate

Phant0m``

kikinelo replied at 2017-08-13 15:12
Guys I managed to flash it via USB. The case was in the front USB port of the PC. I plugged in the r ...

You typically don't need to work with also the Beelink power adapter when flashing these boxes. In-fact, with the countless Beelink GT1 Ultimate boxes I've worked with... Never used the power adapter.

If you using low-end / Old PC, use the USB v2 port and not USB v1.x. Usually USB v2 ports are in back of the old desktop-PCs.

Make sure that you've removed the mini wireless keyboard receiver AND other USB devices from the Beelink boxes before you attempt to flash the boxes.

When you install the USB Burning Tool, make sure to accept it's driver installation. Also make sure you press carefully and holding down the RESET button long enough to hear the computer make a noise to indicate new device detection.

Also to make it crystal clear, Windows 10, 32bit or 64bit both supported by newest and older USB Burning Tool releases.

beelink

Phant0m`` replied at 2017-08-14 03:30
You typically don't need to work with also the Beelink power adapter when flashing these boxes. In ...

well done , the power adapter is really can be ignored since the USB can also offer GT1  electricity to some degree , brilliant saying ! :lol:hug:

Bbeelink09

I installed the USB Tool and I accepted the driver install but, when I plug in my GT1 Ultimate to my computer, with the reset pin in, nothing happens.  The white light does not go on.  Now I do not feel the button click in any more.  Is it possible to break the reset button?

khalid

open the bottom box and press it....

Bbeelink09

Hello,

What does the above error mean?

shaik

Phant0m`` replied at 2017-08-12 00:47
Beelink GT1 Standard / Ultimate Editions S912/G912 (2GB+16 / 2GB+32GB / 3GB+32GB) QCA9377(WiFi+BT)  ...

My details
Gt1 ultimate -S912
S/N:A706D0SBH80298 32G and andriod :7.1.2 details: q201 7.1.2/NHG47L/20171103
please suggest me suitable firmware to flash to recover the booting problem caused by SuperSU application

Blink

I do everything the same as a PC with Win 8.1 and does not detect the GT1 Ultimate box.

I've tried it in several ways, via USB and SD and it does not detect.

I have 6.0.1 and wanted to install 7.12 ...

I would like to watch a video from a PC, I do not have another box to do the flash ...