SER8 8845HS how to remove bios passwords?

fredc

Hello,
I am an new user of a SER8 8845HS.

I set admin and user passwords.

It's a bit annoyning to tap the password at each ignition.
I want to remove the passwords, but the bios does not accept blank password (at least 3 chars per password).

How to remove the password?

Thank you in advance
fredc

tuiguang10

Hello there,

It is recommended that you try to stand the CMOS battery and then clear the CMOS.

Here is the tutorial of removing the CMOS battery: https://mega.nz/file/fz5HHaZQ#8H ... 6Kt4kzXNIyiTS1ORY8w

You can try to clear CMOS : First,please unplug the power supply and HDMI cable. Please press the pinhole of "CLR CMOS" with a pin for about 10 seconds.Ten minutes later, plug the power supply and HDMI cable, turn on the PC again.  Please wait about one or two minute, if you can go to the system, Please repeatedly press delete key as soon as your restart the PC, go to BIOS. Go to Boot option, enable fast boot, press F4 to save.  Here is the tutorial https://mega.nz/file/2nIRGaYI#M2 ... pfyHlqyjnn86TypZp2w  


Have a nice day!