Thermal issues with SEi12 1235U on ALDER107

Badge0257

Hi, I've got an SEi12-A-32500VK0W64PRO, SN 1235U2AF10613, running ALDER107.

I've observed that after several minutes of running at 100% CPU, it will shut down and refuse to power back up until it's cooled down for a half hour or so.

I've been trying to understand the thermal dynamics but I'm not familiar with modern thermal management, throttling, and so forth.  

I'm using CoreTemp 1.18.1, Fan Control V199, and ThrottleStop 9.6 under Windows 11 Pro.

Are there any recommended fan/thermal settings for operating under 100% CPU load for extended period?  Should I be disabling Turbo, etc.?

Is there an upgraded BIOS that might address this?

Thank you for your time.


B

Badge0257

I should add that I do see and hear the fans operating when under load, but even at 100% fan speed (FAN2 at 3857 RPM and FAN3 at 4192 RPM) stability still seems to be out of reach.

Support-03

Hi  there,

Please update the BIOS to see if it works.
Please check the BIOS in your private message.