How to remove rubber feet on the new Ser8?

Andre888 · Post time 2024-05-09 13:07:58

Edited by Andre888 at 2024-05-09 13:57

There is very little grip on the rubber feets on the new Ser8. How can i easily remove them in order to install a new drive?

tuiguang7 · Post time 2024-05-09 16:52:58

Hello, you could just get the little grip out, then you will see the screws, and then open the box, thanks

tuiguang7 · Post time 2024-05-09 17:20:59

Hello, This requires a pointed pair of tweezers to be inserted, and then the pad is pulled out.

Andre888 · Post time 2024-05-09 17:22:22

Edited by Andre888 at 2024-05-09 17:28

tuiguang7 replied at 2024-05-09 16:52
Hello, you could just get the little grip out, then you will see the screws, and then open the box, ...

Hi thanks for your response. If you take something in metal there is a risk in damaging the case or the rubber feet. Can you ask your technicians? Do you have any example of such grip, plastic would be the best. The rubber feets are not coming enough out. It a small thing to adapt, just 1 mm higher. Hope you understand the issue, not enough grip to pull them out. 底部固定螺丝就有橡胶垫挡着，非常小

Andre888 · Post time 2024-05-09 19:43:46

Edited by Andre888 at 2024-05-09 19:48

tuiguang7 replied at 2024-05-09 17:20
Hello, This requires a pointed pair of tweezers to be inserted, and then the pad is pulled out.

Sorry but it's not functional, no tools should be needed to access the screws. I'm sure that i will not be the only one who will complain about it.

tuiguang4 · Post time 2024-05-10 16:31:57

Andre888 replied at 2024-05-09 19:43
Sorry but it's not functional, no tools should be needed to access the screws. I'm sure that i will ...

https://www.youtube.com/watch?v=cy2acwtc8oY
hi，Glad to help, Sorry for the inconvenience when using.
Please check this video about disassembling the PC.

Andre8 · Post time 2024-05-10 19:43:36

tuiguang4 replied at 2024-05-10 16:31
https://www.youtube.com/watch?v=cy2acwtc8oY
hi，Glad to help, Sorry for the inconvenience when usi ...

Thanks for the movie.

mrshad · Post time 2024-05-10 21:08:49

To remove the rubber feet on the new Ser8:

Use a flathead screwdriver or a similar tool to gently pry up the edge of each rubber foot.
Once the edge is lifted, carefully peel off the rubber foot from the surface.
Clean any residue left behind using adhesive remover or rubbing alcohol.
Repeat the process for all rubber feet until they are removed completely.

Andre8 · Post time 2024-05-11 10:10:54

Edited by Andre8 at 2024-05-11 10:21

mrshad replied at 2024-05-10 21:08
To remove the rubber feet on the new Ser8:

Use a flathead screwdriver or a similar tool to gently ...

Hi, did you watched the movie closely? Here is a screenshot, zoom in and you will see some small rubber pieces on the edge. The rubber got damaged. The point i want to make is that it's not functional made. No tools should be needed and for sur not getting damaged. See it as a constructive comment (for Beelink).

tuiguang7 · Post time 2024-05-13 15:24:26

hello, sorry for the inconvenience, for this, we will let the related department know it, and then see if anything we could do to solve this issue, thanks.