upgrading memory in EQ12

DNotti

I have an EQ12 that came with 8gbg of ram.

I would like to upgrade to 16g, but when I open the back there is an HDD fan cover that does not allow access to the motherboard.
How do I remove that cover and upgrade the ram?

Thanks
Dan

tuiguang11@azw-

Can you send the picture to our email for us to confirm:support-pc@bee-link.com

DNotti

email sent

DNotti

I have attached a picture of the HDD cover.

tuiguang11@azw-

DNotti replied at 2024-02-08 00:14
I have attached a picture of the HDD cover.

You need to unscrew the screws on the four sides of the fan board to see where the memory is.

Crashnburn

There is a YouTube video out there that is like 4 1/2 hours long where the guy shows how to get in to the areas to try and upgrade the ram and drives. There are 3 screws to get the fan panel open set along the edges. 2 are in corners and one along the side. I am upgrading the drives later today so I was checking how to get to the m.2 nvme drive.

tuiguang11@azw-

Crashnburn replied at 2024-02-08 22:09
There is a YouTube video out there that is like 4 1/2 hours long where the guy shows how to get in t ...

Yes, please try to remove the screws from the fan board first

DNotti

got it done. works perfectly. thanks!

tuiguang11@azw-

DNotti replied at 2024-02-17 01:30
got it done. works perfectly. thanks!

you are welcome，contect me if you have any qeustion