Mini S - Bios and recovery power failure

jmucelli

Please provide the download link for the latest BIOS and step-by-step instructions for setting up Wake on LAN. Additionally, I am interested in learning how to enable the auto power recovery feature for the mini PC.


SN: B50952BH60022
MINISV1-A-9128SD0W64PRO-B

tuiguang16

Could you please send us a picture about bios version on the bios main page?
This is the tutorial: https://mega.nz/#F!yuISGa4I!s1bQQajKwnsEdzjqq4nopQ
Then we could check if there is a updated bios file.  

Looking forward to your reply so that we can help you better.

And for the Wake on lan, could you tell us your email? So that we can send you the tutorial into your email.

Looking forward to your feedback so that we can help you better.

jmucelli

JTKT001 X64

tuiguang16

Hello there,

I have uploaded the tutorial about the function of wake-on-lan, please have a check.



but could you send me the photo about your BIOS main page?
So that we can know if there is update BIOS can send you.

Looking forward to your feedback so that we can help you better.

rodrigorrtr

Hello, I have the same problem with my BeeLink Mini S. Here's a photo from my BIOS.


I followed the steps mentioned above on Windows, but I had no success

tuiguang16

Hello, your BIOS is the latest BIOS, you do not need to update the BIOS.

Could you please tell us which type you set WOL? wireless or wired?  EQ12 PRO can only support WOL via wired.

If your type is correct, here are some potential solution for you:
1.Ensure that the device you are trying to boot and the device sending the WOL signal are connected to the same network. Verify that the network connection is stable and functioning properly.
2.Check if any firewall or security settings are blocking the WOL signal. Temporarily disable any firewall or security software and test the WOL functionality again.
3.Update network driver: https://beelink.oss-cn-hongkong. ... %BB/EQ12/Driver.zip

Looking forward to your feedback so that we can help you better.

adelebrown68

To set the Intel® NUC to power on whenever a power source is connected: Press F2 during boot to enter BIOS Setup.

judocama

I think this mini pc have very much difficut work wake on lan

tuiguang16

judocama replied at 2024-01-09 04:34
I think this mini pc have very much difficut work wake on lan

Hello, you mean you can not set WOL in your machine, right?

Have you followed above methods I have posted?

Looking forward to your feedback so that we can help you better.

Dyego

tuiguang16 replied at 2024-01-09 18:30
Hello, you mean you can not set WOL in your machine, right?

Have you followed above methods I hav ...

Request for Help to Enable Wake on LAN (WoL) in Beelink Mini S BIOS

Hi everyone,
I'm in need of help to enable Wake on LAN (WoL) in the BIOS of my Beelink Mini S, model with N5095 processor, BIOS version: JTKT001 X64 (version 5.19).

I'm using the UNRAID system, not Windows. Could someone guide me through the steps to activate this feature in the BIOS? What are the specific locations and settings I need to adjust?

Thank you very much for your help!