Stand for GTR7 Pro // keep it cooler :-)

lightpixel · 发表于 2023-09-25 16:01:32

Hello GTR7 Pro users...

I´ve designed a vertical stand for the GTR7 (Pro)...
With my tests at the vray benchmark, I get 10 degrees cooler Ram and SSD temps...
it´s a simple 3d print part... will upload on thingiverse if some one interested.

gtr7 vertical stand

tuiguang13 · 发表于 2023-09-25 18:01:11

Thanks for your sharing.

CNaranjo · 发表于 2023-09-25 21:41:50

Please, share it. I´m interested.

angelinajhonson · 发表于 2023-09-26 12:57:40

badiya ek no.,

JoeGasper · 发表于 2023-11-06 10:54:21

After receiving the free updated vented baseplate, I replaced the 4 baseplate screws with M2.5 standoff screws I had from Amazon B071DJKBNK

GTR7Pro-M2.5-standoff-screws.jpg

blork · 发表于 2023-11-11 18:12:11

Can you please share the file? I'd be up for getting one printed locally.

achimd1 · 发表于 2023-11-12 00:45:28

JoeGasper replied at 2023-11-06 10:54
After receiving the free updated vented baseplate, I replaced the 4 baseplate screws with M2.5 stand ...

Hi,
how much mm is the length from the standoff screw?

Thank you for your feedback!

JoeGasper · 发表于 2023-11-12 02:19:09

Circled is what is shown in the photo above. (From US Amazon item: B071DJKBNK)

steve_usa · 发表于 2023-11-13 15:31:15

I added the same 4 brass standoffs after receiving a vented baseplate for my GTR7 Pro a few months ago.

It works very well, lowering temps and allows opening the bottom baseplate much more quickly.

hlub69 · 发表于 2023-11-14 04:08:15

Please share. I would like to print this too. Thank you.