PROXMOX Installation error

justicepng · Post time 2023-04-03 14:29:57

Edited by justicepng at 2023-04-03 14:31

Mini S12 pro(n100, 16g, 512g-ssd)

no more progress after this screen(first boot screen)
any idea?

this error is not just for me, for many others in my iot forum.

Support-03 · Post time 2023-04-04 11:45:02

Hello,
You need to install the 7.1 version proxmox,or you can install it on another machine and then move the hard drive to this machine to start up.

justicepng · Post time 2023-04-04 14:04:52

Support-03 replied at 2023-04-04 11:45
Hello,
You need to install the 7.1 version proxmox,or you can install it on another machine and then ...

But I want to install it above 7.3
What should i do?
What is the problem.

Support-03 · Post time 2023-04-06 17:36:16

Hello,
It can only support 7.1 version now.

Bobishka · Post time 2023-04-13 02:09:23

Hello, has a solution to this problem emerged? Version 7.1. not in the repository

Support-03 · Post time 2023-04-13 17:55:06

Bobishka replied at 2023-04-13 02:09
Hello, has a solution to this problem emerged? Version 7.1. not in the repository

Hello,
NO NOW.

liyouchen · Post time 2023-04-15 13:21:04

Edited by liyouchen at 2023-04-15 13:24

After prompting an installation error, enter the command mode and enter the following command

nano /usr/share/X11/xorg.conf.d/10-quirks.conf

Copy the Code

Add the following

Section "Device"
Identifier "Card0"
Driver "fbdev"
EndSection

Copy the Code

After the input is complete, press: [Ctrl+X], enter [Y] and press Enter to save

Return to the command interface, enter

xinit -- -dpi 96 >/dev/tty2 2>&1

Copy the Code

press Enter to enter the installation interface

Then you can install it normally