Multiple BSOD on SEi8 8279U

SEi8User

I am having multiple BSOD's on a SEI8 PC that is only a couple of months old. I reloaded windows completely yesterday, but got another BSOD this morning. I keep getting this Microsoft-Windows-WHEA-Logger in event viewer. I get about 120 new alerts every minute. This is what the details say.
A corrected hardware error has occurred. Component: PCI Express Root Port Error Source: Advanced Error Reporting (PCI Express) Primary Bus:Device:Function: 0x0:0x1D:0x4 Secondary Bus:Device:Function: 0x0:0x0:0x0 Primary Device Name:PCI\VEN_8086&DEV_9DB4&SUBSYS_72708086&REV_F0 Secondary Device Name:

No Minidumps are produced after BSOD's.

Support-03

Hello there,
Sorry for your trouble.
Pls try to update the driver and system,and take out RAMs and change their place.
This is the system https://mega.nz/file/23gnwYTS#Om ... vAZVSAi-QJzguzIBoiI
This is the tutorial https://beelink.oss-cn-hongkong. ... ystem%20Tutoria.pdf
This is the driver https://beelink.oss-cn-hongkong. ... %A9%B1%E5%8A%A8.zip
This is the tutorial https://mega.nz/file/mvAS1bQK#xX ... LDUFcxN5WUi6OrYy2js

Skelos

This can't  be a valid solution! I have same problem and I can't spend time for install newly all the system! This is a very basic solution from people doesn't know product they are selling.
So, I have to spend a lot of time for reinstall the clean system everytime you don't know the cause of the issues it means I bough a product (a Beelink PC) without any kind of assistence.
Please, do a effort to find and share a solution without reinstall whole system.
Thanks.

Support-03

Skelos replied at 2024-01-10 20:56
This can't  be a valid solution! I have same problem and I can't spend time for install newly all th ...

Hello there,

What is your item model?
Here are possible solutions besides reinstalling the OS.
① Please update the driver.  


② There might be something wrong with the hard ware components, maybe their connections are loose.
Please take out the SSD and RAM and then put them back , make sure they are installed properly. Also please clean the contacts of the RAM with a rubber. Here is the tutorial https://mega.nz/file/XqZX0TIR#_D ... hBpQ959cg5U3Yw4u1Cc

③ Please repeatedly press delete key as soon as you turn on the PC, go to BIOS. Please send us a picture of the Main page, we will check if you need to update the BIOS.