SOLUTION for anyone brick your PC after invalid BIOS settings change

zungnguyen · Post time 2023-02-10 11:41:35

Edited by zungnguyen at 2023-02-11 02:40

Hi,

I noticed that the GTR6 can be brick if you do some invalid BIOS settings change. The symtoms is:
+ After change BIOS setting, the PC does not boot anymore. No POST at all.
+ Numlock keyboard cannot turn on.
+ Fan works.
+ Clear CMOS or even remove CMOS battery does not help

SO you did soft brick to your PC.
If many people got this problem, I will write a detail post to help you recover the PC. I brick it nearly everyday to test P-state settings (has not been successful yet and BEELINK support has not helped me to explain how to make the P-State work)!

WARNING: THIS TASK REQUIRES ALOT OF PATIENT & NOT FOR NEWBIE.

I wll update later as busy at work now!

tbocek · Post time 2023-02-11 00:36:31

Edited by tbocek at 2023-02-11 03:11

Looking forward to your solution!

I have the same symptoms (fan works, but no HDMI and no USB). I already contacted support, but did not get an answer yet. I also tried to disconnect the CMOS battery, wait a few minutes, but it still does not work. Seems related to this issue: https://forum.bee-link.com/forum ... 6064&extra=page%3D1

edit: nvm, I just saw it here: https://forum.bee-link.com/forum ... amp;extra=page%3D1. Thx a lot, going to buy the CH341 programmer.

BCMielke · Post time 2023-02-13 00:31:55

Yes, this just happened to me.

Disto · Post time 2023-10-13 19:55:39

And so ?

shangxin · Post time 2023-10-28 01:27:00

Then how sia?