SER5 Pro 5600H pre-purchase advice

Sindarius

Good morning, I’d like to buy SER 5 PRO but I want to do some upgrades too (replace the ssd with a 2TB one and increase the RAM) so I’d like to know how to reinstall the original operating system and if is necessary to reinstall all the drivers too. Finally if I lose some warranty.
Thanks for your attention

Cleariati

There's a lot of technical problems with the SER computers. I am shocked Beelink is still selling them after they sent Emails saying they know the motherboards are defective and that they would not be supporting them. If you start changing stuff you will have a dead PC quick.

grilloaguilar

use a partition manager, so you can create an image of the original SSD with all the OS, save it to a external USB flash drive, install the new SSD and restore the image from the USB flash drive to the new drive.
I had use macrium installed in a bootable flash drive.
so start the PC from the bootable macrium app in it, clone the partition to the USB flash drive (it should has plenty of available room to copy the entire partition with the OS).
turn off the pc, put the new SSD, restar it again from the macrium bootable usb drive, use the option to restore a partition from an image file, choose the file you just create in the previous step, and your done.
Restart from the new drive.

Support-03

grilloaguilar replied at 2023-02-09 08:34
use a partition manager, so you can create an image of the original SSD with all the OS, save it to  ...

Hello,
Thanks for your sharing.

Support-03

Cleariati replied at 2023-02-09 06:48
There's a lot of technical problems with the SER computers. I am shocked Beelink is still selling th ...

Hello,
We are improving the quality always.

Support-03

Hello,
If you need the system file and driver,we can send you later.

Sindarius

grilloaguilar replied at 2023-02-09 08:34
use a partition manager, so you can create an image of the original SSD with all the OS, save it to  ...

Thank you for your answer