BIOS issues

zkab

I have Ubuntu 22.10 installed on my GTR5 5900HX (along with preinstalled Windows11).
The command 'dmesg' gives my strange messages:

1. [    3.617750] ccp 0000:05:00.2: enabling device (0000 -> 0002)
   
2. [    3.617756] ccp 0000:05:00.2: can't find IRQ for PCI INT C; please try using pci=biosirq
   
3. [    3.617800] ccp 0000:05:00.2: ccp: unable to access the device: you might be running a broken BIOS.
   
4. 
   
5. [    0.776099] ACPI Error: No handler for Region [ECRM] (000000001f075226) [EmbeddedControl] (20220331/evregion-130)
   
6. [    0.776605] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20220331/exfldio-261)
   
7. [    0.776625] ACPI Error: Aborting method \_SB.GPIO._EVT due to previous error (AE_NOT_EXIST) (20220331/psparse-529)
   
8. 
   
9. 
   

Copy the Code

Is this a BIOS issue?

Jackson

I am not a linux expert myself, but you might try Linux people if you don't get a response here.
This isn't necessarily a beelink specific issue.

Support-03

Hello,
Pls contact us in support-pc@bee-link.com.

papajon

I have a similar setup and I use a menu made by Grub Customizer. I am curious if you found a solution to these ACPI errors.
Thanks for any info.
Jon Loveless
jon@schuless.com

Magister

I always have those error too, ccp and broken BIOS, and the ACPI one.

The ACPI one I did some research and it's more of a warning from what I understand.

I'm using MX Linux for 6+ months on my 5600H and have no problem with it.

Magister

ccp is a crypto module in AMD processor, it looks like it's not enabled in the BIOS, lots of motherboard displays the same problem.

Only bee-link can add it in the BIOS I guess?