does not turn on, the consumption is 0.7A stable, the fan is at maximum speed. All power is rising, there is clocking on quartz, there are data packets from the BIOS, there are no inclusions, there is no image. I'm assuming a BIOS firmware defect. Requires firmware or dump for firm SPI on the programmer.
Sorry for the trouble.
1.Please change another HDMI cable or power supply.
2.Please unplug the power supply and HDMI cable. Please press the button of "CLR CMOS" for about 5-10 seconds.Ten minutes later, plug the power supply and HDMI cable, turn on the PC again.
3.There might be something wrong with the hard ware components.Please take out the SSD and RAM and then put them back , make sure they are installed properly.
Also please clean the gold finger with a rubber. Here is the tutorial https://www.youtube.com/watch?v=hEd_7nmWVOk
Post time 2022-09-29 21:51:30
Post time 2022-09-30 20:47:44
Author