GTR7 SSD ports

EEshorts

On my GTR7, each SSD port are keyed with a NVMe M key connected. The second port is labeled as SATA3 but it is NOT a B+M key connector.
Is this the correct hardware configuration?
I don't see how I can insert a non SATA3 B+M key SSD into the second port.

Is there a GTR7 BIOS that will configure two NVMe SSDs?

Thanks.

jdanecki

It does not need to be B+M on the port side for SATA. It must just block NVME (M-only) cards from pushing into the SATA connector and it does. It is the drive that should be B+M (and they usually are) to fit into this slot.
I have such config in GTR5 and works fine: NVME(M.2)+SATA(M.2)+HDD SATA.

EEshorts

jdanecki replied at 2022-01-14 17:16
It does not need to be B+M on the port side for SATA. It must just block NVME (M-only) cards from pu ...

Thank you, I will purchase a SATA3(M.2) and put it into the second slot.