After the update to CoreElec 9.2.4
sometimes at startup of the device the screen remains all green, no logo, no menus, so only green color
and nothing can be done only press power button to shutdown
the units sent to users as free for tests or for awards
has not completely equal hardware to regular (commercial version) of GS-King X
running tests with CoreElec devs we saw that this type of units
has a hardware version similar to GT King X
and this is the cause of the bootloader issues when you use DTB of regular GS King X.
To new CoreELEC releases a new DTB will be available for GS King X (called rev a) to be used with these particular test units
---
Also the green screen will be resolved to new releases,
this fix in some cases unfortunately could cause a short delay with Kodi startup
Sorry, we recommend that you go to coreelec's forum for this question. It is difficult for us to help you solve this problemOr you can provide me with a video or picture, we will see if we can help you
heh there is nothing to see...
when you turn on the device just after Beelink logo at boot, the screen become all green
you can only turn off by pressing the button on the box or unplung the power cable
We are resolving the problem of the failed LibreELEC boot on some of these devices with different hardware revision.
A suggestion for Beelink company:
if you have to cooperate with CoreELEC Team at least
you can inform the CoreELEC Team that you produce the same unit with different hardware
and save to everyone a lot of trouble and time losed...
Post time 2020-08-09 22:41:53
Author
Post time 2020-08-10 09:19:04
Post time 2020-08-15 08:55:13
