AP34 Pro

rlaroquem · 发表于 2020-08-08 00:24:53

Hi, my AP34Pro Mini PC one of the two HDMI port stop sending signal, suddenly stopped. Now I'm with one display working. When the coputer bootup still only one screen turn on with Bee-Link logo. Both display are new and working fine with another computer.

Regards,

EM

beelink · 发表于 2020-08-08 10:31:06

Do you use a HDMI to VGA converter？

rlaroquem · 发表于 2020-08-09 00:09:15

Hi, Im using HDMI cable. No converter.

rlaroquem · 发表于 2020-08-10 01:41:56

The issue weas fixed by downloading the drivers from links below. There are not the latest but worked.

AP34 Pro win10 1903：
https://mega.nz/#!rmZzjKBA!eiOMY ... 54PTL8gsWib7svKDur0

drive:
https://mega.nz/#!6zRzGaTB!5fFZg ... -SWCr_wfKiN-suS11II

beelink · 发表于 2020-08-11 10:17:13

rlaroquem replied at 2020-08-10 01:41
The issue weas fixed by downloading the drivers from links below. There are not the latest but worke ...

I am glad that your problem has been solved, and sorry that we did not provide you with good help

rlaroquem · 发表于 2020-08-12 06:00:04

I have another AP34 Pro, with no display signal & no access to BIOS when turning on it just a blue light on the front of the PC. Any suggestion on how to reset factory or to bring it back to life?

I tried, ddisconnectin the internal battery, pressing de reset button inside for 20 seconds. Nothing same issue.

beelink · 发表于 2020-08-13 11:04:02

rlaroquem replied at 2020-08-12 06:00
I have another AP34 Pro, with no display signal & no access to BIOS when turning on it just a blue l ...

I would like to ask if you has flashed other BIOS, and could you try to boot for two minutes and press the "Caps Lock" key on the keyboard to see if the keyboard light in uppercase will light up

Magendanz · 发表于 2021-12-19 09:07:42

I was able to recover my AP42 using this technique and an $11 EEPROM programmer: https://youtu.be/QcwXuxiTyXE

I now have an AP34 in the same condition (which is apparently fairly common), but can't locate the latest BIOS for the device. Beelink has scrubbed the original posts from this forum and they wouldn't even send me a link when I asked support via email. :-(