LAN disconnect Kodi and samba server - COREELEC no boot

robertop2

Hi, i have a problem with Beelink GT King Pro (firmware 910P0):

- Kodi disconnect from my samba server (samba server setting SMB1 for Kodi 17.x)
- Kodi disconnect from DLNA server (DLNA rygel server)- VLC disconnect from SAMBA and DLNA
- Wifi mode high temperature on case
- Amazon prime video only 480 not full HD
- COREELEC no boot from SD and usb (error no mount sysroot)
- DISTRO Ubuntu 20.04 LTS Focal Fossa no boot from SD and usb

spikerguy

Hello Dear,

How are you booting CoreElec and Ubuntu from ?

The image shows that your trying to boot into upgrade mode. I am not sure where you got the Ubuntu image as official Ubuntu image might not work as every ARM SBC have different boot settings required.

For the CoreElec image, I assume you have the CoreElec Sd card which comes inside the box along with the device. To boot into it you can boot into android and Press and hold Power button until as dialog box appear which will show Reboot to CoreElec. Make sure your sd card is inserted before you press power button.

Other way to boot into CoreElec is to install app from google play store call Restart to LibreElec and then open this app and press OK.

This will boot into CoreElec with sd card inserted.

If you're downloading CoreElec image from Official CoreElec site then you will have to manually set the dtb file in the boot partition of the sd card.

Try the above methods and report back.

robertop2

I was trying to use gt king pro in all functions I have a NAS and a SAMBA server but GT KING pro disconnects from the LAN then I wanted to see if a Linux distro was working or in the COREELEC case but the sd that was sent to me is damaged then I have tried to create a new sd I have attached my procedure in pdf file the screen remains still on the initial boot

darkstar

robertop2 replied at 2020-06-21 22:49
I was trying to use gt king pro in all functions I have a NAS and a SAMBA server but GT KING pro dis ...

I read some users comments that their SD card did not boot.
You need to replace dtb file, after that probably it will work.

If not download latest coreelec image and write it with balenaetcher to a usb or sd card.
copy Device Tree file from dtb folder to root of coreelec partition and rename it as dtb.img
thats it,

robertop2

darkstar replied at 2020-06-22 03:51
I read some users comments that their SD card did not boot.
You need to replace dtb file, after tha ...

already done thanks what you described is in the file attached to post --->installcoreelec.pdf

darkstar

robertop2 replied at 2020-06-22 03:56
already done thanks what you described is in the file attached to post --->installcoreelec.pdf

Does coreelec boot or not?

robertop2

no coreelec not boot screen freeze on Beelink Logo

4ndr3

yes i am too can't booting COREELEC

darkstar

As I remember before 1st boot you need to push and hold pinhole (under device) and then push power button to activate the USB/SD card boot. But Im not sure maybe beelink changed it.

And another suggestion is to use a USB stick it performs better for me.

robertop2

I transferred the CORELEC distro with Rufus to the USB stick the same does not work on the OTG input