|
|
I have a GT1 Ultimate s / n G912GSJH40179 32G that was having a problem with the lightghome, it rebooted all the time. Still, I was not communicating via bluetooth and did not establish the city location, even in a manual.
It had formatted and returned to the factory settings, but it didn't work. So, I decided to update the firmware. I downloaded the USB Burning Tool v2.0.9 and ROM GT1_710N1_AP6255.img from the Beelink forum.
During the process there were several errors, not even 1%. In a forum message I read that even with an error, I could disconnect the USB cable and reconnect. That's what I did, then he successfully completed the burning 100%. However, now the GT1 has stopped working completely. It just turns on the white led, but nothing appears on the video or responds to the remote control.
Could you help me fix it, guide me through the correct procedure or direct me to the correct ROM for my equipment? Here is the picture of his motherboard.
Thank you very much!
|
|
Post time 2020-03-05 05:10:25
Post time 2020-03-05 16:42:51