Beelink GT1 kernel

ncux3012 · 发表于 2017-06-02 04:27:12

Edited by ncux3012 at 2017-06-02 23:40

Hello! Thank you for the wonderful device GT1. We are satisfied with everything, but there is one issue. Streaming video with a large bitrate periodically starts playing in the slideshow mode. This happens on all firmwares, that newer than version 104. In all these firmwares, the processor frequency is 1.5 GHz. In the firmware 104 the frequency of the processor is 2 GHz. Apparently, the problem is somehow connected with this. If you install the kernel from the firmware 104 to newer firmware, the problem disappears. These findings were made by testing the work of the TV box by a large number of users communicating on the forum 4pda.ru. Could you please make some investigations for this issue? We hope you will make a fix. Thank you very much!
WBR
Your grateful customers

Krendelyok · 发表于 2017-06-04 14:41:57

With a high degree of probability, we can say that the problem is solved. freaktab.com/forum/tv-player-support/beelink-aa/beelink-android-tv-box/gt1/649811-fix-trubbles-streaming-video-amlogic-s912. We hope that Beelink will pay attention to this.

dejavumore · 发表于 2017-06-02 07:19:11

Iz Beelinka kazu da cpu na 1,5 GHz radi stabilnije,manje se greje i ne puca sistem,sad koliko je to tacno to samo oni znaju,jer u poslednjih mesec dana podrska je katastrofalna i sve sto ih pitas ladno sve ignorisu.Imam lose iskustvo tri puta im pisem da OTA neradi,ali nijednom mi nisu odgovorili ili dali savet.

Krendelyok · 发表于 2017-06-02 17:59:07

dejavumore replied at 2017-06-02 07:19
Iz Beelinka kazu da cpu na 1,5 GHz radi stabilnije,manje se greje i ne puca sistem,sad koliko je to ...

It's not that. This is a flaw in the firmware code. The S912 processor is not capable of operating at frequencies above 1.5 GHz. Therefore, it never worked at 2 GHz. Even with the use of firmware 104. But we have established the fact that when using the firmware core 104, the defect described in the first message disappears.

dejavumore · 发表于 2017-06-02 21:53:41

TO je tacno procesor S912 nikad nije ni radio na 2GHz to je vise marketinski potez Beelinka a ovo sa "Streaming video with a large bitrate periodically starts playing in the slideshow mode"resices vrlo lako u kodiju u podesavanjima-player settings-videos-processing-enable hq scalers for scaling above-0%-alow hardware acceleratrion-MediaCodec-uncheck.Then in addons open my addons-VideoPlayer Inputstream-inputstream Adaptive-enabled and Rtmp input -enabled.
Posle ovoga neces imati problema sa skoro nijednim fajlom pusta skoro sve.Nadam se da sam ti pomogao,pozz

Krendelyok · 发表于 2017-06-03 00:30:02

dejavumore replied at 2017-06-02 21:53
TO je tacno procesor S912 nikad nije ni radio na 2GHz to je vise marketinski potez Beelinka a ovo sa ...

No. We are probably talking about different problems. The problem described by us is not solved by your method. We solved this problem only by installing either the firmware 104, or the kernel from the firmware 104 in the other firmware.

Djuganight · 发表于 2017-06-06 19:34:17

Krendelyok replied at 2017-06-03 00:30
No. We are probably talking about different problems. The problem described by us is not solved by ...

where is this firmware and kernel and how downgrade?

By the way, my antutu tests with jus 1.5Ghz are always +40000 so seeing the tests made with the 2.0Khz, which are lower I assume its a fake 2.0Ghz speed

Krendelyok · 发表于 2017-06-09 15:27:27

Djuganight replied at 2017-06-06 19:34
where is this firmware and kernel and how downgrade?

By the way, my antutu tests with jus 1.5Ghz ...

Hello! References to the corrected firmware can be found here:
freaktab.com/forum/tv-player-support/beelink-aa/beelink-android-tv-box/gt1/649811-fix-trubbles-streaming-video-amlogic-s912

Djuganight · 发表于 2017-06-12 01:08:17

very confusing topic and even more confusing when the links send us to a russian web site.
Is it possible to do a english thread with instalation instructions?
Thanks