I bought GT King Pro. Arm Cortex A73 should read 2208 GHz. but actually has 1,7G

NASAROG · 发表于 2019-11-29 15:08:36

I bought GT King Pro.
Arm Cortex A73 should read 2208 GHz. but actually has 1,7Ghz.
HI, How I can get restore the firmware for frequency 2,2 Ghz ?

SGT43 · 发表于 2019-12-22 00:49:50

Merhaba bende aliexpres'ten satın aldım aynı sorun bende, de var bu bizimle, mi alakalı yoksa satıcı ile, mi alakalı bir sorun.
satıcı ile alakalı, ise bu sorunu nasıl çözeriz. bu konuda Bee-link bize net bir bilgi vere bilir, mi ?
Lütfen Bu konuda yardımcı olur musunuz bee-link ?

MaryAnn · 发表于 2019-12-24 21:47:45

Edited by MaryAnn at 2019-12-24 21:55

Contact Beelink.
They are offering to give customers the firmware to overclock the cpu back to 2.2GHz.
The reason they went back to 1.7GHz was because the system became unstable at 2.2GHz.
Unless you really want to go to 2.2GHz I would advise you leave it at 1.7GHz.

I am in the same position. I contacted Beelink & that's the reason I know about it.
It seems they are using two Cpu revisions. There is Rev A & rev B.
They flatly denied it at first but then admitted the had two Cpu's & that they had changed the firmware because it was causing problems.
None of the adverts tell you its 1.7GHz which is a poor move from Beelink.
Some people bought the Beelink GT King & found they were running at 2.2GHz. The Beelink GT King machines were supposed to be runninmg at 1.7GHz while the Beelink GT King Pro was supposed to be at 2.2GHz.