MINI MXIII-II Update Damage System

caster008

Hi, I performed a firmware update this device but during the update it is blocked so I had to turn it off, I tried to restore it with burn tool but it locks at 2% sector ddr and with the micro sd after pressing the button part but the green screen appears, I do not know anymore that someone can help me?
Thanks in advance

beelink

hi  friend
Maybe you have chosen the wrong firmware, please provide the S/N code on the back of the machine, we will provide you with the latest system firmware.

best regards

caster008

Hi, I hope this is the problem I send the code of the device.
Can you also tell me the various methods to carry out this operation?

MINIMX3X2 S905X2G16GCM273

beelink

caster008 replied at 2019-01-17 16:50
Hi, I hope this is the problem I send the code of the device.
Can you also tell me the various metho ...

hi friend
Please refer to the firmware below and the tutorial

MINI MXIII II_113M0
http://t.cn/E572UbS

Brush tutorial：
http://t.cn/E57UdhY

Brush tool：
http://t.cn/E57b1p6

caster008

Hi, I tried all 2 methods but without success.
With Image burn the above stops at 2% then it does not go on.
With Sd Car Maker as soon as I go ahead, the TV screen shows green.
What can I still do to recover it ??
Thank you and goodbye

beelink

caster008 replied at 2019-01-28 07:46
Hi, I tried all 2 methods but without success.
With Image burn the above stops at 2% then it does no ...

hi 、
Please try to replace the USB2.0 port and re-flash, try a few more times.

caster008

Hi, thanks to you I solved the problem and thank you again. I wanted to ask another thing in my remote control is the function of controlling my TV as I can make it work ??